流速控制 meaning in Chinese

flow rate control

Classifying datapacket and traffic control method in wlan
网络业务流分类与流速控制的实现
In this model , the velocity was controlled below50 m / s so that it is easy that the temperature of outlet propellant exceeds 1000k . by the measure of advancing the melting point of metal panel to 3000k , the temperature of outlet propellant even could be close to the very high temperature of the metal panel . it is very active to improve the capability of the whole propulsion system
在本文模型中,将管道内工质的流速控制在50m / s ,热交换器的出口工质温度就能够提升至1000k以上;提高换热器高温加热段的金属平板熔点到3000k以上,完全可以将工质出口温度提升至接近金属平板的温度,这样可以大幅度提高推进系统的性能。
Finally , three representative control strategies , such as the control of external carbon flow rate , the supervision control of the do process and the control of internal recirculation flow rate , are used in the simulator under different weather conditions , in order to analysis the practicability and feasibility of the simulator
论文最后主要通过输入不同气候条件的输入组分数据，采用外加碳源控制、溶解氧浓度监控控制和内回流流速控制三种典型的控制策略，分析本研究开发的仿真软件在活性污泥过程的应用。