油井产量 meaning in Chinese
well yield
Examples
- Technically , the optimum perforated degree of well is defined as its critical flow rate is equal to its flow rate
从纯技术上考虑，临界产量与油井产量相等时的射开程度即为油井的最佳射开程度。 - Hydraulic fracturing is firstly applied to increase the output of oil well as a technique , and then is applied to test the preliminary ground stress
水力劈裂首先作为一种技术最初应用于石油工业以增加油井产量，后来用于初始地应力测量。 - Simulation results shows that water cut increases rapidly after coning control to the level before coning control and oil production increases a little but too little compared with the production loss during oil well shut - in
还通过数值模拟方法对压锥效果进行了研究，模拟结果显示，压锥后油井的含水快速升高至压锥前的水平，油井产量虽略有提高，但与压锥期间油井关井损失的产量相比，仍然得不偿失。 - When the new ipr is used to direct the design of suction parameters of rod pumping wells , the oil wells can run at the reasonably flowing pressure and the maximal liquid output , which is of important significance to raising economic effects of low permeability oil field
应用新型油井流入特性曲线指导油井抽汲参数设计，确保油井在合理流压下生产，可以实现油井产量最大化，提高低渗透油田开发的经济效益。 - This article introduces the handle object and applied conditionetc . using the software the amount of test work can be decreased , the designing level of oilfiel surface technology canbe hightened , the practicality of the design raised , the production technology condition can be improved or optimized and the economic effency enhanced
气举是中原文东油田的主要采油方式.针对该油田连续气举开发过程中出现的注入气利用效率低,综合效益差的问题,建立了在供气能力有限时的优化配气数学模型,并给出了解析法求解过程.现场试验表明,应用该技术可以实现连续气举井的合理配气并提高油井产量,适合在油田推广应用