水锤压力 meaning in Chinese
surge pressure
water hammer pressure
Examples
- Check valve applied in descreasing water hammer pressure when the pump stops
止回阀在减小停泵水锤压力中的应用 - Effect of pressure conduit structure movement on water hammer pressure
有压管道结构运动对管内水锤压力的影响研究 - The effect of variation in surge shaft section size upon the reflection of water hammer pressure and the speed of quality fluctuation attenuation
调压井断面尺寸变化对水锤压力反射及质量波动衰减速度的影响 - Based on physical experiments , establishing mathematical model , carrying on theoretical calculations , and contrasting experimental results with theoretical ones , it turned out that under the same initiate flow rate , the quicker the closing of the ball valve , the longer the stable time when the liquid gets to vaporizing pressure , and the bigger the water hammer in water interception collision ; under the same closing velocities of the ball valve , the larger the initiate flow rate , the longer the stable time when the liquid gets to vaporizing preesure , and the bigger the water hammer in water interception collision
在试验研究的基础上，建立了含气水锤数学模型，进行数值计算，并与试验结果进行了比较，结果表明，在管道初始流量相同的情况下，球阀关闭速度越快，液体达到汽化压力凡时稳定的时间越长，弥合水锤压力也越大;在球阀关闭速度相同的情况下，管道初始流量越大，液体达到汽化压力凡时稳定的时间越长，弥合水锤压力也越大。 - Once the water reaches its maximum speed , the valve slams shut and pressure is built up in the pump . this pressure forces open a second valve linked to the delivery pipe . when nullah water falls past the hydraulic ram , its momentum will lift a tenth of the water to a storage tank located near the esther li building photo 2
泵内有活门，当溪水在流动中受阻，会产生比正常压力高十倍以上的瞬时水锤压力，此时，泵内的另一活门会打开，把十分之一的溪水抽往设于李慧珍附近的储水缸备用（图二） 。