水汽密度 meaning in Chinese
water-vapor density
Examples
- The paper works out the ice crystal spectrum distributing in the different macroscopic and micro - backgroud of the cloud ( ie , the thickness , the temperature and the supersaturation with respect to ice of the nucleation layer ) . this paper also works out the amount of catalyst which is allowed in the cloud nucleation layer according to the different quantity of the supercooled water , the density of the supersaturation of the vapor with respect to ice . simultaneously , the paper discusses the i nfluence of remaining time when seeding artificial ice nucleus in the different ascending - velocity and altitude , and elicits the proper seeding altitude of the catalyst
以此解为依据，得出了不同均流时，人工引入冰核在核化层存留时间，再以此时间作为人工冰核凝华增长时间，求出不同的云宏微观背景(如核化层厚度、温度、冰面过饱和度等)下的冰晶谱分布，经和实际资料比对符合相当好。进而求出核化层中不同过冷水量、冰面过饱和水汽密度下云核化层可允许的催化用量。同时讨论了不同升速，不同高度引入人工冰核时对其存留时间的影响。 - On the saturate concentration , the moisture density in the micro - holes was 100 times larger than the vapor density in the standard state , but only 8 % of liquid water . the water inside the plastic material was in a special liquid state . the delamination and the delamination recovery were observed by c - sam
当水汽浓度达到饱和时，在塑封材料中可以被水分子进入的有效体积内，实验条件下的水汽密度为标准状态下水蒸气密度的100倍，为液态水密度的8 ，表明在塑封材料中的水分子以一种特殊的液态水形态存在。