残余变形 meaning in Chinese
permanent set
residual deformation
residual strain
set yielding
Examples
- Probing into residual deformation rate and hydraulic test of volume of gas bottle
气瓶容积残余变形率及水压试验探讨 - Different assembly ? welding sequence may result different risidual deformation , we usually take fixup by spot welding first , then take welding symmetrically
不同的装配?焊接顺序，焊后产生不同的残余变形，一般是先点固，再进行对称焊接。 - The residual deformation around the hole was measured by digital speckle correlation technique and the relation curves of residual strain at the side of hole vs fatigue life cycles were obtained
再应用数字散斑相关技术测量了不同疲劳循环次数后孔周的残余变形场，并给出了孔边最大残余应变与疲劳循环次数的关系曲线。 - It can be observed from experiment that the final whole deformations of the tubes take on the shapes of " v " , and " w " in certain condition . the local dents of the tubes are obvious . the critical velocities and plugging modes of penetrations can be obtained
从实验中可以观察到：管的整体残余变形为“ v ”形，在一定条件下，还可能为“ w ”形；有明显的局部凹陷，可以得到穿透时的临界速度，其穿透破坏形式为冲塞型。 - The rudiment rules of the factors on the subway residual deformation are found and a empirical formula for the subway residual deformation is given , which can consider the unit weight of the subway tunael , the intension of earthquake . all of these sophisticate the theory of the design of subway tunnel
发现了它们对震后残余变形影响的初步规律，并给出了一个能考虑隧道埋深和地震设防烈度的地铁隧道震后残余位移经验公式，为完善地铁抗震设计理论提供了依据。