校准系数 meaning in Chinese
calibration coefficient
Examples
- Calibration factor of the primary device
一次装置的校准系数 - This program is developed for single - component calibration and multi - component calibration with computing of calibration coefficients , data acquisition and basic data analysis
可以用于单元校准和多元校准，计算校准系数，进行数据采集及初步的数据处理。 - The strain - gauge balance must be calibrated before it ’ s using in the wind tunnel tests , and the precision and accuracy of the balance will be affected by the characters of the calibration system
而应变天平在用于风洞试验前,必须进行静态校准,天平校准系统的性能指标将直接影响天平校准系数的准确性。 - The position measuring system was another important system in the new balance calibration system . to work out the calibration loads in the bcs of balance with the results of balance position measuring is the key technique to improve the veracity of the balance calibration results
通过天平空间位移测量并将地轴系校准载荷换算到天平体轴测量坐标系后再进行天平校准系数计算,是保证本文所研制的地轴系天平校准系统静校结果准确性的关键技术途径。 - In practical application , due to the parameter accuracy of two point temperature correction is limited by readout circuit noise 、 dynamic range 、 analogue to digital converter word length and calculating noise , the performance of focal plane array detector is not the performance it should be
目前实用性较好的两点温度定标法的校准系数精度受读出噪声、信号动态范围、模数转换字长和运算噪声的限制，很难使焦平面探测器的空间残留噪声达到应有的精度。