标定误差 meaning in Chinese

calibrated error
calibration error

Lastly , the calibration error and measurement data had been analysed
最后对标定误差和实验测量结果进行了分析。
Finally , the calibration error was made certain in 11 - 17 % through data analysis
最后对标定和测量结果进行了分析，得出标定误差为11 7 。
In image - based , also called feature - based systems , the error signal is defined in terms of image features and is directly measured in the image coordinate system . therefore , computational costs are significantly reduced and the system becomes less sensitive to abstract errors in camera calibration and system modeling
误差信号按照图像特征来定义而且直接在图像坐标空间来测量，因此可以大大降低计算量，而且系统对相机标定误差和系统建模误差不敏感。
We validated this system on the black - body oven , analyzed the errors which brought about by the optical system , ccd , surroundings and workers , expounded the improvement methods ; 5 . we had done many real measurements with this system . after analyzing the experiment results , we improved the original system and proposed a new system
在自己研制的黑体炉上对系统进行了标定实验研究，对标定误差进行了分析，对消除光学系统、 ccd 、环境以及主观因素等对误差的影响提出了改进和处理方法，大量实验得出了较为稳定的标定测量值，为系统进行实际工况环境下的测量奠定了基础； 5