无源网络 meaning in Chinese
passive electrical network
passive network
Examples
- Software realizing way based on frequen specific property of passive network modle of li sha - yu graphy
基于李沙玉图形无源网络模型频率特性的软件实现方法 - The existing dynamic output feedback schemes use a seven - order passive network , but our dynamic controller is realized by a six - order square linear system
目前的动态输出反馈控制器都采用7阶无源网络，而本文的无源网络是由6阶平方线性系统实现的。 - The control strategy of the vsc which supplying a passive network is also proposed , and the designing of the passive high - pass filter for hvdc - vsc is briefly discussed
提出了连接无源网络时vsc的控制策略，简单讨论了hvdc - vsc无源高通滤波器的设计。 - They are usually applied to optical signal distribution systems . such as cable television , broadcasting systems and pon systems . in this thesis , y - branch and multimode interference in soi technology are studied and simulated
因为它在光通信系统、光纤用户网、光纤catv 、光无源网络( pon ) 、光局域网等领域中被广泛应用。 - The insert loss of the passive circuit is less than 3 . 5db , return loss better than 10db . the ammic5040 is used to drive the tga1141 , and the power is splited into two signals , each of these is to drive tag4517 . at the output port , the power is 4w
无源网络损耗小于3 . 5db ,回波损耗优于10db 。第一级放大器采用ammc5040以驱动tga1141 ,通过功率分配器将信号分为两路以驱动两路tga4517功率放大器。最后获得了4w连续波功率输出。