挤压比 meaning in Chinese
extrusion ratio
Examples
- Standard test method for extrusion rate of elastomeric sealants
弹性密封件挤压比的标准试验方法 - Finite element simulation of large distortion and thin part in combined extrusion process
大挤压比薄壁件复合挤压成形工艺过程的数值模拟 - The optimal extrusion parameters are as following : extrusion temperature is 375 - 400 ? , the reduction ratio is 25 : 1
该合金的最佳挤压工艺参数为，挤压温度为375 - 400 ，挤压比为25 : 1 。 - 2 . the room temperature tensile strength of alloy made by mlsd relate to the extrusion temperature and the extrusion reduction ratio , with high temperature and reduction ratio , the tensile strength becomes low
二、多层喷射沉积过共晶a1 - si合金的室温强度与挤压温度和挤压比有关，挤压温度越高，合金的强度会降低。 - The main parameters ( extrusion ratio , temperature , article size , deformation velocity , configuration of die , lubrication etc . ) effecting powder extrusion formability and forming process of powder cladding wire have been analyzed
对影响粉末挤压成形性能的主要参数(挤压比、温度、颗粒度、变形速率、模具入口形状以及润滑等)以及粉末包覆线成形的工艺作了定性的分析。