总压力 meaning in Chinese
general pressure
maximum total pressure
overall pressure
tital pressure
total pre ure
total pressure
Examples
- The total pressure exerted by the atmosphere is the sum of the pressures exerted by its component gases .
大气的总压力为其各组分气体的压力之和。 - However , te - rich phases and point defects with high concentration were found locally . not only the vapor - solid equilibrium but also the vapor - liquid - solid equilibrium should be considered for the annealing of the crystals with te - rich phases . by analyzing the phase diagrams of cd - te and p - t plot of cd1 - xznxte ( x = 0 . 04 ) , it was concluded that for the purpose of rem
本文通过仔细分析cd . te二元相图和cd卜龙znxte ( x = 0 . 04 )的p一t相图，认为为了去除富te相，获得稳定的电学性能，退火时晶片温度应小于115ok ，气氛环境的总压力应小于pcs (对cdte ， pc汹 - Loading grads is another non - structure coefficient influencing loading characteristics except loading frequency . the low grads characteristics are analyzed deeply by simulation , and found that applying structure invariance principle with acceleration compensation can reduce loading grads effectively . the dissertation also simulates and compares the systems with connect hole of different size , and founds that the size of connect hole has an optimized value
加载梯度是除了加载频率之外另一个影响加载性能的非结构上的参数,论文作了大量的仿真分析来研究小梯度加载特性,得出了具有加速度补偿的结构不变性原理可以有效的降低小加载梯度时的多余力矩的影响;通过对具有不同的总压力流量系数的系统的仿真比较,得出了连通孔的大小在不同工况下存在一个最优的值,其开度需要合理的选择。 - In order to make clear the influence of two kinds of stress to the total stress , equivalellt thermal stress of lpg vessel under only tempertae load and its equlvalent mechanical stress under only inner wall stress are calculated and analyzed , then its equivalent total stress is calculated , analyzed and compared
为了弄清这两种应力分别对总压力的影响的大小，首先单独对液化气压力容器仅受温度载荷时的瞬态当量热应力以及仅受内壁压力时的瞬态当量机械应力进行了计算分析，然后计算了液化气容器的当量总应力并对其进行了分析比较。 - Longradar offer approximate ten thousand of products of pressure , vacuum , flow , air velocity , temperature , humidity , level and valves , which are commonly applied in the fields of industrial automation , hvac , building autoimmunization control , electric power , petroleum , chemical industry , boilers , water treatment , compressors , freezing refrigeration , food brewage , pharmacy , light industrial , environmsent protec - tion , clean industry etc
在上游安装一个带有蛋形格栅的椭圆形流体喷嘴，可以提供一个精确构造简单的空气体积测量系统。在喷嘴的出口，空气释放时的风速分配是一致的静压为零。因此，喷嘴上游的总压力是喷嘴出的速度压力-于是就容易计算体积了。