强力旋压 meaning in Chinese
power roll forming
power spinning
Examples
- The process of power spinning for taper has been simulated and an estimation model of finite element post - process has been established according to predicting process parameters
根据预测的工艺参数对锥形件强力旋压过程进行模拟，建立有限元模拟后处理评价模型。 - Trough choosing different professing parameters including the ratio of thinning and the ratio of feeding and using two rollers power spinning machine experiment research on cylinders with inner ribs has been started
摘要通过选取不同的壁厚减薄率和旋轮进给比作为工艺参数，利用双旋轮强力旋压机对带内筋筒形件作旋压加工实验。 - The familiar defects of powerful spinning have been listed , such as crack , rising skin , gluing knot , piling , speed bulge , the wound inside the wall , expanding etc . with analysis of the cause and probing into treatments according to the basic fondant and spinning craft parameters
摘要列举了强力旋压常见缺陷，例如裂纹、起皮、堆积、粘结、鼓包、内壁划伤、扩径等，分析了产生的原因，针对坯料和旋压工艺参数，简要探讨了应对措施。 - Response surface has been built based on bp neural network with relationship of maximum of spinning force variety , material parameters and power spinning process parameters established and optimum achieved by using particle swarm optimization algorithm hence optimization of tube power spinning process parameters
摘要以bp神经网络为基础构建响应曲面，建立材料参数、筒形件强力旋压工艺参数等和旋压力最大变化值之间的关系，并用粒子群优化算法求解，获得符合优化条件的最优解，从而实现筒形件强力旋压工艺参数的优化。