小球团 meaning in Chinese
nodule
prill
semipellet
Examples
- The influence of different fuel adding rate and different fuel adding method on process making micropellet in sinter mixture was given
摘要研究了不同燃料分加比例和分加条件对混合料造小球团及烧结过程的影响。 - Distribution of mixture for adding fuel separately in the micropellet sintering processing must be notice , otherwise the heat system in sinter would be destroyed
燃料分加小球团烧结时必须注意混合料布料问题，否则会破坏烧结过程热制度。 - Abstract : point at the properties of taigamg bf burden composition and the raw material of sintering , the necessity and outlook of using mps technique were analyzed
文摘:针对太钢高炉的炉料结构和烧结原料特点,分析了在该厂推广应用小球团烧结技术的必要性和前景。 - In the suitable distribution condition of sinter mixture , the utilization coefficient of sinter machine would be raised , the solid fuel consumption would be reduced and the strength of sinter ore would be raised in micropellet sinter processing
在适宜的布料条件下，小球团烧结时采用燃料分加工艺可提高烧结杯利用系数、降低烧结矿固体燃料消耗量并提高烧结矿强度。 - Abstract : the fuel addition manner in mini - pelletized sintering process was studied in this paper . according to the results of study , the view - point was proposed that adding all fuels extenally would supply sufficient heat to the bed in some extent , and so decrease energy consumption and cost investement
文摘:本文对小球团烧结中燃料的添加方式进行了试验研究,根据试验结果分析,提出燃料全部外加在某种程度上更能给料层提供足够的热量,达到降低能耗,节约成本的目的。