复合模 meaning in Chinese
composite mold
compound dies
compounddie
duplex die
gang dies
multiple die
shearing die
Examples
- Complex modulus apparatus
复合模量仪 - The finite element method analysis and the practice indicated that the reinforced foundation section can use composite modulus to computer the settlement , and the settlement of the center of the old road must be analyzed under different conditions
有限元分析及工程实践表明，对于加固区可采用复合模量法来进行疏桩复合地基的沉降计算，而对于原路中心处应结合原路不同的工况合理选择分析方法，使情况更加接近实际。 - It shows that the calculation results derived from the rigid - pile stress divergence approach is more precise than that of national code approach ; and the national code approach is defective in calculating the composite modulus by attempted to use the theory and calculation method of rigid - pile composite foundation
结果表明，采用刚性桩复合地基的应力扩散法比复合地基“规范法”预测变形精度更高；规范法计算复合模量的方法存在不足。 - ( 3 ) based on the working performance and mutual influence of the system of pcc pile - soil - cushion , pcc pile composite foundation is discussed in elastic method . a new calculation method of composite modulus of the pcc pile composite foundation is developed . furthermore , pile - soil stress ratio and settlement can be derived from the proposed method in this paper
( 3 )基于pcc桩?土?垫层所组成的一个工作体系，综合考虑各部分的工作特性及相互影响，对pcc桩进行整体分析，建立桩体平衡方程，考虑pcc桩在褥垫层及下卧层中的上、下刺入量对复合模量的影响，并通过迭代的方法最后确定桩体模量发挥系数，提出了一种求解pcc桩复合地基模量的计算方法，进而得到pcc桩复合地基的沉降计算和桩土应力比公式。 - 25 , the stress distribution angle should be zero . at last , analysis of composite modular by three - dimension finite element is carried out . it considers the effects of different ldr and n . it shows that the values of finite element analysis are well accordance with those of in - situ tests under the working load
最后，采用三维复合模量有限元法，分析了不同加筋密度和层数对加筋复合地基沉降和加筋垫层应力分布的影响，指出在工作荷载作用下，有限元分析结果与实测结果具有较好的一致性。