均匀形核 meaning in Chinese
homogeneous nucleation
Examples
- The results indicate that phosphate film forms at first at the boundaries between ferrite and graphite
结果表明，磷化膜晶核首先在铁素体石墨界面等处形成，是一个不均匀形核过程。 - The reason is that the elastic energy increases the nucleation work while the formation of primary martensite can excite the release of elastic energy in austenite to promote the formation of after martensite and intensify the tendency towards homogeneous nucleation
其原因是弹性能的存在增大了初生马氏体的形成功，而初生马氏体的形成则会激发奥氏体内弹性能的释放，弹性能的释放可促进继生马氏体形成，并增大其均匀形核倾向。 - As foamer , had been made with buffer ph solution . in which the composition and reaction rale of combination process must be controlled . with scanning electron microscopy ( sem ) , it is clear to observe that the shape of tih2 powder is changed from sharp after coated
试验分析表明，以ph溶液作为缓冲沉淀液，通过控制反应成份浓度和速度，利用非均匀形核法可以实施al _ 2o _ 3包覆，其中溶液浓度和ph值对包覆效果影响最大，是保证非均匀形核包覆的关键。 - The thermodynamic conditions of decomposition of the foaming agent tih2 , homogeneous and heterogeneous nucleation in high - temperature solid and liquid , growth and movement were achieved to demonstrate the trend of pore evolvement in this paper . moreover , according to the characteristics of in - situ gas foaming , the equations of the height change of foaming samples with heating time were primarily established to study the behavior of foams and to guild the experiment processes
另外，论文通过大量的热力学分析，得出了发泡过程中发泡剂分解以及气孔在固液态时的均匀形核和非均匀形核、气孔的生长和运动等热力学条件，揭示了气孔演化的趋势；论文还根据内生气源发泡的特点，初步建立了高温熔体中气体发泡高度随时间变化的方程，为进一步深入的研究发泡机理奠定了一定的基础。