喷射速度 meaning in Chinese
jet velocity
spouting velocity
Examples
- The desirability of providing a high hydrogen injection velocity and a low oxygen injection velocity has been previously discussed .
上面已经讨论过，希望能够提供高的氢喷射速度和低的氧喷射速度。 - In agreement with this concept is the additional experimental result that decreasing the mean hydrogen injection velocity increases the stability limit temperature .
这一概念是与补充试验的结果相符的，即降低氢的平均喷射速度使稳定性极限温度增加。 - The uniform spotting droplets were obtained by means of the controls of micro - fluid viscosity , micro - injection speed and micro - injection distance for eliminating the defects of droplet
通过微流体粘度控制、微喷射速度和微喷射距离的控制消除样点缺陷，获得了均匀的点样样点。 - While the speed is very large , the fuel - air mixing behind the airstream is decreased and the span that the fuel flow in the second combustor is reduced , so the combustion efficiency is decreased , h ) if the fuel streams impinge with the airstreams directly at the air - inlet exit , it make against increasing the combustion efficiency , i ) increasing air - to - fuel ratio within proper range can increase the combustion efficiency
增加燃气喷射速度有利于增强回流区强度，头部燃烧温度上升，但速度太大则会减弱燃气同空气在进气道下游的掺混燃烧，减少燃气在室内停留时间，燃烧效率降低； 8燃气射流与空气流在进气道出口直接撞击不利于燃烧效率的提高； 9在适当范围内增大空燃比能显著提高燃烧效率。