啮合特性 meaning in Chinese
eingriffsverhalten engagement behavior
Examples
- Analyze the scm ' s structure and its meshing characteristics systematically
系统分析了空间凸轮机构结构及啮合特性。 - The paper studies the surface geometry of globoidal indexing cam by applying the theory of conjugate surfaces and the method of coordinate transformation , presents the equations related to the main inducement curvature of the cam profiles , analysis and deduces the equations of two circumscription curves , which judge if the conjugate surface could mesh properly . some calculate examples and conclusion are given . the surface equation of the globoidal cam and conjugate equation are established
论文首先在分析空间啮合原理基础上，采用坐标变换法推导出弧面分度凸轮的工作廓面方程、啮合方程和压力角计算公式，对弧面分度凸轮的啮合特性进行了深入的分析和研究，对判断曲面能否正确啮合的依据如两类界限线方程以及诱导主曲率等进行推导，并给出算例。 - Through systemic analyzing on spiral helical gear transmission with different basic parameters , the essay found out rules of how can such basic parameters influence spiral helical gear engagement characteristics . so it brings forward the auxiliary assembling mode of adopting one straight gear and one helical gear on condition of little axial angle as well as treasures to ameliorate ill engagement performance on condition of large axial angle , another two jobs of the essay are to clarify the wrong concept that spiral helical gear can only transmit movement but not impetus and to provide a brief and practical method of analyzing contact for gear pairs whose surface equations can be written out directly
通过对不同基本参数的螺旋齿轮传动进行系统研究，找出了螺旋齿轮基本参数对其啮合特性的影响规律，提出小轴交角条件下可采用一直齿轮、一斜齿轮的齿轮副组合方式，给出了大轴交角条件下啮合性能不良的改进措施。澄清了螺旋齿轮只能传递运动不能传递动力的误区，为能够直接写出齿面方程的齿轮副进行齿面接触分析提供了一种简便、实用的新方法。 - Focusing on the spatial cam mechanism ( scm ) , the dissertation , starting with the practical processing and the characteristics of the structure and meshing , detailedly analyzes and experiments research the structure theory , processing error and , one - side process and profile inspection of scm with spatial meshing principle and rotating transformation matrix operator methods
本文以空间凸轮机构为研究对象，从工程实际出发，以空间啮合原理和旋转变换矩阵为工具，从结构特点、啮合特性入手，对空间凸轮机构的结构设计、加工误差、单侧面加工工艺及廓面检测技术进行了深入地理论分析和实验研究。 - Based on the analysis and discussion of characteristics and law of gear engagement under condition of elasto - hydrodynamic , a calculation method on sliding and rolling work loss of standard spur gear transmission had been put forward , and the relationship of geometric parameters and overlapping coefficients of gear with sliding work loss was revealed
摘要基于弹流润滑状态下的齿轮啮合特性及规律分析和讨论，提出了标准直齿传动的滑动功损及滚动功损的计算方法，揭示了齿轮的几何参数和重迭系数与滑动功损的关系。