×

台架模拟试验 meaning in Chinese

bench simulation test

Examples

  1. It is demonstrated by the tests carried out in the laboratory that the mathematical model set up in the paper is reasonable and the simulation program is of high simulating accuracy
    室内台架模拟试验结果表明,本文所建立的泵运动规律的数学模型是正确的,具有较高的仿真精度。
  2. The degrees of crystallinity of pure ptfe under the different conditions of water cooling , air cooling and furnace - varying cooling were made comparison by xrd . the thermal stability of pure ptfe and solid lubricant was analyzed by dsc - tg ; the composition and valence state of elements in the surface of carbon fiber , solid lubricant before and after friction test and lubricant transfer film were characterized by xps ; the frictional property of solid lubricant was tested by pin and disk test rig . the frictional wear property of solid lubricant between embedded bearing sleeve and steel axle friction pair ring was tested by special simulate test machine , the hardness of solid lubricant was tested by pm ; the compression strength of solid lubricant was tested by material test machine
    用sem表征原料微观结构、摩擦表面及润滑转移膜表面形貌:用xrd进行原料物相分析,及比较水冷却、空气冷却、随炉冷却三种工艺条件下的纯聚四氟乙烯树脂的结晶度;用dsc - tg分析纯聚四氟乙烯树脂及固体润滑剂的热稳定性;用xps表征碳纤维表面、固体润滑剂摩擦前后表面、润滑转移膜表面的元素组成、价态变化;用销盘式摩擦磨损试验机对固体润滑剂进行摩擦性能测试;采用专用的台架模拟试验机对固体润滑剂镶嵌轴承套与钢轴摩擦副间的摩擦磨损性能进行测定;用莱次偏光显微镜( pm )测试固体润滑剂的硬度;用材料试验机测试固体润滑剂的抗压强度等。

Related Words

  1. 台架吹塑
  2. 台架调整
  3. 台架烧蚀试验
  4. 台架式烘干小车
PC Version

Copyright © 2018 WordTech Co.