变形率 meaning in Chinese
deformation rate
Examples
- If the compliances are not equal in the three orthogonal directions, it is anisoelastic .
如果在三个垂直方向的弹性变形率并不相等,即它是不等弹性的。 - Probing into residual deformation rate and hydraulic test of volume of gas bottle
气瓶容积残余变形率及水压试验探讨 - When ignoring the influence of deformation , the constitutive relation can be reduced to that of jaumann derivative
当忽略变形率的影响时,欧拉表述的大变形固结本构方程可退化为通常的jaumann率形式。 - The results show that the bonding is good when the temperature , two passes deformation ratio of rolling are 1 250 c , 50 % respectively
结果表明;轧制温度为1250c 、两道次的轧制变形率为50 %时,界面结合较好。 - Abstract : in this paper , the generalized variational principle of ela stic and plastic problem with finite displacement is derived by means of semi - in verse method
文摘:利用半反推法,导出了弹塑性有限变形率形式的广义变分原理