压力分布模型 meaning in Chinese
pressure plotting model
pressure-plotting model
Examples
- In this thesis , pressure distribution model of water film in sliding shoes supporting clearance with considering inertia is deduced and according curve is drawn to vividly illustrate the effect of inertia on water film
本文推导出了考虑惯性时滑靴支承间隙中水膜的压力分布模型，并作出曲线加以形象的说明。 - By using the mathematical model for lfg pressure distribution under a vertical extraction well , method of optimum design of landfill gas collection system with vertical extraction wells was discussed in this paper , including the determination of lfg extraction flow , radius of influence of extraction well , and the buried depth of the well
本文利用竖井抽气条件下填埋代压力分布模型，分析讨论了抽代系统各参数对对抽气效果的影响，提出了垃圾填埋场填埋气竖井收集系统的抽气量、抽气井影响半径、抽气井埋深的优化设计方法，可为填气污染控制与回收利用系统的规划设计及运行管理提供技术支持。 - On the basis of measured results of contact pressure on abundant literature and the computed results in this paper , simplified contact pressure models have been put forward . the finite element program msc . nastran was selected to analyze the response of pavement under the two modelled loads . the effects of axle load and material properties were studied , and the effects of truck load on permanent deformation and fatigue crack were also discussed
本文首先根据轮胎胎面花纹类型的不同，提出接触面的简化模型；然后参考相关轮胎与路面接触压力的测试结果，并结合本文的测试结果及轮胎与路面接触压力的模拟计算结果，提出接触面内的压力分布模型，即轮胎作用于路表的荷载简化模型；接着利用有限元软件msc . nastran对沥青路面在该荷载模型作用下的响应进行计算分析，还讨论了轴载的变化及路面材料参数的变化对路面结构响应的影响，并且对车辆荷载对车辙和疲劳裂缝的影响进行探讨。