卷绕速度 meaning in Chinese
reeling velocity
wind speed
Examples
- Spinning temperature were controlled ranging from 190 to 205 , rotate speed of the screw was less than 70r / min , the ideal room temperature was 10 ~ 15 , and the winding speed decreased with the increase of content of baso4
纺丝温度控制在190一205之间，螺杆转速< 70r / mln ，卷绕速度则是随着baso4含量的升高而下降，实验中采取低速卷绕，纺丝理想环境温度控制在10 ~ 15 ’ c左右。 - On the other hand , the collection on a rotating cylinder is helpful to the process of electrospinning , and it is furthersome to get the ordered mats , otherwise , because the velocity of cylinder rotating is far less than that of nanofiber depositing , the rotation of cylinder has not the function of drawing
另外，采用辊筒收集有利于纺丝工艺的顺利进行，而且辊筒收集能使纤维毡中的纤维较整齐排列，但辊筒的卷绕速度远远小于电纺丝速度，辊筒的旋转不能起到拉伸的作用。 - Abstract : the formation technologies , the structure and properties of tcs microporous man - made yarn - kind new polyester fibre which was spinned in tcs with some micrometallic - oxide have been studied . the results indicate that the rheological behaviour and spinnability of commixed polyester melt , and the structure and properties of the fibre , are relative to the spinning temperature , melt pressure , microporpus size for spinning , formation conditions , thermo - vascellum temperature , thermo - vascellum position and rolling speed , besides the viscosity of polyester cuts , coacervation particles , adding amount and size of micrometallic - oxide
研究表明， tcs微孔化共混聚酯熔体在成型加工中的流变行为和可纺性，及其纤维的结构性能除了与原料切片的特性粘度、凝聚粒子和共混聚酯中超细金属氧化物微粒的添加量、粒径等因素的影响有关外，还与纺丝温度、纺丝熔体压力、喷丝板微孔尺寸、冷却成形条件、热管温度、热管安装位置以及卷绕速度等因素的影响密切有关。