单调加载 meaning in Chinese
monotonic loading
Examples
- In the paper , two kinds of finite element analysis are used for modeling static loading on the specimens through software ansys
论文采用有限元分析软件ansys对进行单调加载试验的墙体试件进行了模拟分析。 - Full scale tests on 3 tube - to - plate joints is carried out in this dissertation . then the tests result is compared with results of finite - element analysis the difference of them are analyzed
本文对3个管板节点,进行了静力单调加载的足尺试验,得到了其破坏模式和极限承载力。 - After analyzing the difference of damper ' s energy dissipation , between two waveshapes of a simple loop load test , a comprehensive method for the capacity assessment of damper ' s power dissipation suggested
通过对单调加载中因加载波形不同而导致耗能的变化的分析，提出了阻尼器耗能性能的综合评价方法。 - Full scale tests on six chs joints , including 2 k - joints , 3 kk - joints and 1 kkt - joints , used in roof structures of the palaestra in chang sha is carried out in this dissertation
本文对长沙贺龙体育场钢屋盖结构中的6个圆钢管相贯节点，其中包括2个k型节点、 3个kk型节点和1个kkt型节点，进行了静力单调加载的足尺试验。 - It was known from the analysis of ductility coefficient that all specimens of overlapped joints other than sj3 one possessed a better ductility and lower deformation rate of the joints under repeated action of loads compared to that under monotonic loading
由延性系数分析可知除sj3的延性系数较低外其余搭接节点试件具有较好的延性；承受反复荷载作用时与单调加载时相比节点变形率低。