单体配比 meaning in Chinese
comonomer ratio
monomer ratio
Examples
- The relationship between the factors such as the molecular weight of copolymer and peg , the proportion of monomers and peg , have been discussed
同时讨论了共聚物单体配比、 peg分子量、 peg与马来酸酐的投料比与酯化产物的性能关系。 - The factors which influenced material ' s dehydration capabilities were researched , which included temperature , monomer content , ion concentration etc . the experiments showed the introduction of organic silicon kh570 could drop the material ' s dehydration speed
讨论了单体配比、溶胀脱水温度和离子浓度等因素对溶胀脱水性能的影响,结果表明有机硅的引入能降低水凝胶材料的脱水速率。 - The factors which influenced hydrogel material ' s mechanical intensity were researched , such as temperature , monomer content etc . the introduction of organic silicon kh570 could improve the material ' s draw intensity notably , the increase of nw content droped the material ' s draw intensity
本文讨论了单体配比等因素对有机硅改性pvp水凝胶软接触透镜材料机械强度的影响,结果表明有机硅kh570的引入能显著提高材料的拉伸强度, nvp含量的增加使材料的拉伸强度下降。 - The results of the uni - factor experiments and perpendicular experiments show their best mechanic synthesizing craft as followed : nvp ( 10 % wt ) , kh570 ( 20 % wt ) , hema ( 70 % wt ) , initiator ( 0 . 2 % wt ) , crosslinker ( 20 % wt ) , reacting 20 hours under 80 c . the factors which influenced organic silicon modified pvp hydrogel soft contact lens material ' s swelling capabilities were researched , which included temperature , monomer content , ion concentration etc . the experiments showed the equation swelling content ewc improved with the increase of nw , droped with the increase of kh570 and ion concentration , improved then droped with the raise of temperature , and hydrogels got the least ewc at 45 c . experiment carried on todiscuss water dehydration mechanism of organic silicon modified pvp hydrogel soft contact lens materials , which showed dehydration process could be divided into evaporating stage and diffusing stage
正交实验结果表明, nvp ? hema ? kh570共聚物的机械性能最佳时,其合成工艺条件为: nvp用量10 (质量百分含量,下同) , kh570用量20 , hema用量70 ,引发剂aibn用量0 . 2 ,交联剂nmba用量0 . 2 ,反应温度为80 ,反应时间16h 。讨论了单体配比、溶胀温度、离子浓度等因素对有机硅改性pvp水凝胶软接触透镜材料溶胀性能的影响。实验得出:水凝胶材料的平衡溶胀度ewc随单体nvp含量的增加而增大, ewc随kh570用量的增加而减小,随离子浓度的增大而略微降低,随溶胀温度的升高先稍微下降后有所提高, 45时平衡含水量最低。