单位增益 meaning in Chinese
unit gain
unity gain
Examples
- In such cases , the unused amplifier should be connected as a unity - gain follower ( force and sense pins tied together ) and the input should be connected to ground
同样的原因，不用的放大器应当成单位增益跟随器（驱动端和感测端接到一起） ，且其输入端应接地。 - According to the model , circuits are designed , which include the circuit of two kinds of pixel , column output circuit , output buffer and decoder that is used to select row and column
接着再利用n + - psub型二极管的模型设计图像传感器的电路,包括两种像素电路,列输出电路,单位增益缓冲器,以及用于行列选择的译码器。 - Output buffer is realized by the feedback application of amplifier which can drive big load capacitor . the av of amplifier is more than 70db , phase - margin of it is more than 70 degree , psrr of it is more than 50db
单位增益缓冲器是具有驱动大负载电容能力的运算放大器的反馈应用,该运算放大器的增益大于70db ,相位裕度大于70度。 - 3 . a good result is gotten under the star - hspice simulation . the dc gain is 90 db , the offset voltage is 40 u v while driving 10k , the unity - gain frequency is 10mhz with phase margin 67 , the slew rate is 10w us while driving 10pf
用star - hspice仿真软件对电路仿真，在1 . 5v电源电压、直流10k负载、交流10pf负载的情况下，整个共模电压范围内跨导基本保持恒定，只有18的变化，直流增益90db ，单位增益带宽10mhz ，相位裕度80度，压摆率10v s 。 - Firstly , a two - stage structure for the ota is presented after comprehensive considerations on characteristics like open - loop gain , unity - gain bandwidth , phase margin and settling time . then the input and output topologies have been decided by comparing different structure available for this purpose
首先,通过对ota开环增益、单位增益带宽、相位裕度和建立时间等性能指标的分析,并对比了几种典型运放结构,设计开发了一种cmos全差分共源共栅两级运算放大器框架。