功率效率 meaning in Chinese
power efficiency
Examples
- Power and efficiency characteristics for steady flow irreversible carnot engine with heat leak
有热漏时定常态不可逆卡诺热机功率效率特性 - A push - pull output stage was used in the circuit to extend output voltage from rail to rail and a class ab biasing is used to improve the power efficiency of the circuit
输出级采用共源结构的互补推挽输出结构，提高了输出电压的动态范围。并使用甲乙类的输出结构，提高了电路的功率效率。 - The results reveal that the ocdma systems with fbgs based encoder / decoder are not only easy to plan , but also have large number of simultaneous users , high power efficiency and low bit error rate ( b er )
结果表明，基于fbg编解码器的ocdma系统具有设计简单、用户容量大、功率效率高和误码率( ber )低等方面的优点。 - 3 . a rf pa linearziation system that combines rf predistorting technique and feedforward technique is present . contrasted with basic feedforward system , the main improvement of new system is the signal feature of error signal path
由于在主功放和误差功放前分别加上了射频预失真单元，因此提高了整个系统的线性度和功率效率。 - Microwaves of 1gw , 2 . 1ghz are obtained in pic simulation . the beam - to - microwave efficiency is about 16 % . the frequency and mode of the generated microwave are also very pure
粒子模拟研究结果表明,在580kev 、 10 . 6ka的束流条件下,轴向提取圆波导te11模虚阴极振荡器在2 . 1ghz处可以获得大于1gw的高功率微波输出,功率效率为16 % ,频率、模式纯净。