剪切方式 meaning in Chinese
cut mode
Examples
- Finally , author have discussed the relationship transformation process of the honghe fault shear mode and block movement , proofed that the eta - type tectonic system was formed in miocene epoch
讨论了红河断裂剪切方式的转变过程与岩块运动的关系，论证了歹字形构造体系形成于约20ma的中新世时期。 - It is shown by constraint exploding cylinder technology that , with value of the ratio decreasing , the adiabatic shearing sensitivity of steels decreases , which characterized by the decreasing density of adiabatic shear bands ( asbs ) and transition of asbs from the transformed to deformed ones ; there are two critical values for the ratio under a specific exploding condition , no localized adiabatic shearing will occur if ratio value is lower than the small critical one ; the large critical value determines the way of adiabatic shearing : transformed asbs will form if the ratio value is higher than the critical one , otherwise deformed asbs will form
通过对若干钢约束爆炸圆管试验结果的分析表明：随强导比的降低，钢在一定爆轰条件下的绝热剪切敏感性增加，表现为剪切带密度下降，同时相变带过渡到形变带；对应一定的爆轰条件，强导比有两个临界值，如果强导比值低于较小的临界值，材料将不以绝热剪切方式（集中的剪切变形）破坏；较大的临界值决定材料绝热剪切变形的方式，当材料的强导比低于它时材料以形成形变带的形式失效，反之则以“白亮带”形式破坏。 - In order to understand the effect of alternating magnetic field on the dynamic performance of a disk - type magnetorheological ( mr ) fluid damper based on shear operation , the dynamic character of a flexible rotor supported on the disk - type mr fluid damper was experimentally studied under sinusoidal magnetic field
摘要为了掌握交变磁场对基于剪切方式的盘型磁流变( mr )流体阻尼器动力特性的影响，试验研究了正弦磁场下支承在盘型磁流变流体阻尼器上的柔性转子系统的动力特性。