初始速率 meaning in Chinese
initial rate
Examples
- Pri primary rate interface
初始速率接口 - Inorganic carbon transport was a major factor in facilitating quenching during the initial stage and the initial rate of fluorescence quenching in the presence of iodoacetamide , an inhibitor of co2 fixation , was 87 . 9 % of control
初始阶段的荧光淬灭主要是由于无机碳转运所致，加入co _ 2固定的抑制剂iodoacetamide ，荧光淬灭的初始速率为对照的87 . 9 。 - The proposed model - beam - particle model is validated to simulate some routine tests of concrete which including uniaxial compressive test and uniaxial tensile test to prove that the numerical model can effectively to describe the complete failure process caused by the initiation , propagation and coalescence of cracks . the influence of the meso - mechanical properties to the macroscopic failure behavior is discussed in this paper . the proposed model is employed to simulate the dynamic failure process of concrete under impact loading , and analyse the failure behavior of concrete with different impacting velocity
本文建立了混凝土的梁-颗粒数值模型，并利用该模型进行了混凝土在单轴压缩和拉伸载荷作用下，混凝土从微裂纹的萌生、扩展、贯通直到宏观裂纹产生导致破坏的全过程的数值模拟，探讨了混凝土材料细观结构对其宏观力学行为的影响；利用该数值模型，模拟了钢弹以一定的初始速率垂直侵彻混凝土圆板的动态过程，对计算结果进行了动画显示，并分析了不同钢弹初始速率对混凝土圆板破坏形式的影响。 - The empirical initial rate expression for the reaction was found to be - d [ pu ( iv ) ] / dt = ao [ pu ( iv ) ] [ dmhan ] 1 18 / [ h + ] 2 22 and the complete rate equation was given out as 8 . 12 [ pu ( iii ) ] + 95 . 9 [ pu ( iv ) ] ^ and 14 . 5 , the rate constants were determined to be o . stl . tonol / l ) 104 ^ ' 1 and a ^ 103 ( mol / l ) " ^ - s " 1 , the effect of some factors such as concentration of fe3 + , uc > 22 + , ion strength and temperature on the reaction was also investigated and a reaction mechanism was discussed as well
通过中国原于能科学研究院博十学位论文dlssertalon扣rt卜edoctorateofcmnahstltuteofatomlc巳nergy考察反应物浓度、酸度、离子强度、温度等因素对反应的影响，确定反应的初始速率万程为：一d叶iv ） dt一4 pll （ iv ） dmhan ’ ‘且h lz二二，反应的完全速率方程为：