切削温度 meaning in Chinese
cutting temperature
Examples
- For more in detail , see lefon s operation manual for tube cutting saw
可有效降低切削温度，延长刀片使用寿命，提高切割效果，详见lefon切管机使用说明书。 - The control degree of the cutting process is the key for determining whether the automation manufacturing system could run normally , so the monitoring technique concerned is essential . but the traditional monitoring methods have define limitation and can not adapt to the different conditions
对切削过程的控制程度是决定自动化加工系统能否正常运转的关键，但是传统的检测方法如切削力、切削温度等都有一定的缺陷，不能适应不同的条件。 - On the condition of the test , the cutting force of ticp / fe composites was more than which of 45 steel by 60n , and the cutting temperature was higher than which of 45 # steel by 90 , and the roughness of machined surface was almost as much as which of 45 # steel . tic ceramic particles enhanced the cutting force and the cutting temperature of ticp / fe composites , but had little effect on the roughness of machined surface . the machining quality of ticp / fe in situ composite was similarity to 45 # steel
在本试验条件下，原位tic _ p fe复合材料切削加工时的切削力与45 ~ #钢相比要大60n ，切削温度要高90 ，加工表面粗糙度与45 ~ #钢相近； tic陶瓷颗粒使原位tic _ p fe复合材料切削加工时的切削力增大、切削温度增高，对加工表面粗糙度影响不大；原位tic _ p fe复合材料的可加工性与45 ~ #钢相当。