出口面积 meaning in Chinese
discharge area
exit area
outlet area
Examples
- Impeller diameters and outlet areas for industrial centrifugal fans
工业离心式风扇的叶轮直径和出口面积 - The influence of the area contraction ratio of rotary flow generator on the hydraulic characteristics of level rotary flow has been investigated by the hydraulic model test of an internal energy dissipation tunnel
摘要通过模型试验，研究了起旋器出口面积收缩率对水平旋流泄洪洞水力特性的影响。 - The conclusion that the optimal secondary nozzle exit area generating the maximum thrust agrees well with the numerical simulation , indicating that the exit area of secondary nozzle should be optimized according to structure and flow parameters during design
表明在引射火箭设计时，应结合引射火箭的结构和流动参数对二次喷管出口面积进行优化设计，以达到最佳推力性能。 - The results indicate that with decrease of exit area of secondary nozzle , the bypass ratio is decreasing , and the static pressure in integrated ejector combustor is increasing , and mixing condition becomes better . there exists an optimal exit area of secondary nozzle to get maximum thrust of rocket ejector
结果表明：引射能力随着二次喷管出口面积的减小而减小；整体式引射燃烧室压强随着二次喷管出口面积的减小而上升，混合随之更为充分；存在一个最优的二次喷管出口面积，使发动机推力最大。 - It is shown that when the exit area of secondary nozzle and the fuel / oxidizer ratio is fixed , the increase of mass flow rate of secondary flow lead to the decrease of velocity of mixed flow , and increase of total mass flow rate . the synthetical result of these two phenomenon cause the increase of thrust of rocket ejector , but the increasing magnitude is relatively small , indicating that these is no necessary to claim large bypass ratio in rocket ejector design . in the comparison between two configurations , the typical one has better performance , indicating the importance of pressure ratio
结果表明：在固定二次喷管出口面积和氧燃比的条件下，二次流(引射空气流)流量的增加引起混合气体出口速度的下降和总流量的增加，二者综合作用使发动机推力增加，但增幅不大，表明在设计发动机结构和工作参数时，不必过分追求大的引射系数；两种结构的性能对比分析表明了增压比对引射火箭性能的提高具有重要意义；对引射火箭的热力循环分析同样表明，增压比对于提高发动机性能非常关键。