凝固速率 meaning in Chinese
coagulation rate
freezing rate
rate of solidification
solidification rate
Examples
- The impurities present have an important effect on the rate of setting .
存在的杂质对凝固速率有很大的影响。 - L4in this eutectic composite . the volume fraction of tac could be changed with increasing solidification rate
随着凝固速率的增大， '相的尺寸越来越小，其形状也越来越圆。 - The former followed linearity rule and the latter followed the rule of r - 0 . 5 the volume fraction was steadiness when the solidification rate increased
随凝固速率的增加tasi _ 2纤维体积分数基本不变。 - 4 . under the directional solidification , either sub - or hyper - eutectic alloys , with the increase of growth rate , the lst dendritic arm spacing decreases and 2st dendritic arm spacing is restrained to some extent
4定向凝固条件下，随着凝固速率的增加，无论亚共晶合金或过共晶合金，一次枝晶间距减小，二次枝晶生长得到不同程度的抑制。 - Following the increase of the solidification rate , the y ? phase gets smaller and smaller , and the morphology of y ? phase becomes more circular . the inter - rod spacing of tac obeys relationship with x13 . 18r04972 , and the transverse area of tac versus solidification rate is s = ? . 6597r + 5
在该共晶自生复合材料中tac纤维间距和凝固速率的函数关系为，横向面积与凝固速率的函数关系为s = - 0 . 6597r 5 . 14 ， tac纤维体积分数在一定范围内随凝固速率变化。