冷却剂流量 meaning in Chinese
coolant flow
coolant-flow rate
Examples
- In order to meet the needs for measuring the coolant water flow rate in - core of a nuclear heating reactor , two types of turbine flow meter with low rotation speed have been developed in our institute
为适应核反应堆堆芯冷却剂流量测量的需要，开发研制了新型低速涡轮流量变送器，按流量信号输出不同，分别为磁感应模拟信号输出和数字开关量输出低速涡轮流量变送器。 - Therefore , sequential research on chf is necessary . when in accidental conditions of nuclear reactor , the mass flux of coolant is very low . in such condition , the steam quality is high , and the mechanism of chf is mainly controlled by bulk flow , whereas microcosmic parameters near the chf area are affected by the flow conditions in whole tube which called " upstream memory effect "
在反应堆事故工况下，冷却剂流量很低，含汽量很高，其临界机制与正常运行工况下的临界机制有所不同，不仅是一种主流控制临界工况，更由于其局部的各微观参数受上游流道的累积效果的影响而存在上游记忆效应。 - The hot - dip - depth and temperature difference between fluid and platelet wall are influenced by many factors , such as the coefficient of heat conductivity of platelet and fluid , the coolant fluid , the knudsen number , and so on . high temperature make kn number become bigger , and then microscale effects become notable
3 、热浸深度、流体与层板壁面的温差大小要受层板的导热系数、冷却剂流量及流动的kn数等因素的影响。高温条件使kn数增大,微尺度效应增强;而高压条件下kn数减小,微尺度效应减弱。