冲塞 meaning in Chinese
drift plug
Examples
- Analysis on the plugging model of concrete targets struck by rigid projectiles
混凝土靶板冲塞型穿孔模型研究 - The erosion failure and plug failure of target are the main character under this condition
靶材发生侵蚀破坏和冲塞型破坏。 - At first , the shear deformation presents in the target along the penetration direction , then , when the deformation depth reaches to a critical value , the material in front of the projectile will be shear failure , thus a plug failure is achieved
靶材先是出现沿侵彻方向的剪切变形，当变形达到一定深度后，弹体前方的材料与靶材发生剪切断裂。靶材发生冲塞型破坏侵彻机理为剪切型侵彻或冲孔型侵彻。 - It can be observed from experiment that the final whole deformations of the tubes take on the shapes of " v " , and " w " in certain condition . the local dents of the tubes are obvious . the critical velocities and plugging modes of penetrations can be obtained
从实验中可以观察到：管的整体残余变形为“ v ”形，在一定条件下，还可能为“ w ”形；有明显的局部凹陷，可以得到穿透时的临界速度，其穿透破坏形式为冲塞型。 - When the projectile velocity reaches to the normal projectile velocity , the projectiles fracture crushingly , the penetration process is similar to the process penetrated by long rod projectile and can be divided into three processes that is crater process , steady penetration process and plugging process
当弹速达到常规弹速后，弹体发生粉碎性破坏，此时侵彻过程类似于长杆弹侵彻，侵彻过程可分为开坑阶段、定常侵彻阶段和剪切冲塞阶段。