共晶组织 meaning in Chinese
eutectic structure
Examples
- The effect of solidification rate on eutectic microstructure of high chromium cast iron
凝固速度对高铬铸铁共晶组织的影响 - The experimentally measured minimum lamellar spacing is 65nm , which is larger than that of 7 . 4nm predicted by tmk model
实验中获得了间距为65nm的精细层片共晶组织。 - Influenced by the alternating current field , except that a little of eutectic iron - phase still is the acicular structure , the most of eutectic iron - phase of the al - 20si - 5fe - mn alloy is refined into tiny particles which is segregated
Al - 20si - 5fe - xti合金通过交流电场作用，共晶组织全部呈细小的颗粒状均匀分布于- al基体上。 - Under the conditions of low stress abrasion , eutectic composition is the optimal composition of high - cr white cast iron . the narrow intercarbide spacing is quite benefical to protect the austenitic matrix
摘要低应力磨料磨损条件下，高铬白口铸铁以共晶成分为宜，在细小的共晶组织中，碳化物间的短小空间对共晶奥氏体起到良好的保护作用。 - Because of the effect of sip porous skeleton , the primary si and the eutectic si were separated on the surface of sip porous skeleton under slow cooling conditions , and there were no typical eutectic microstructures in the al - alloys phase of the composites . 6
处于si相颗粒间隙的过共晶al - si合金液在缓慢冷却凝固时，初晶si和共晶si会附着在si多孔体骨架上析出，在最终的复合材料中没有典型的al - si共晶组织。