光电子谱 meaning in Chinese
photoelectron spectrum
Examples
- Standard guide to charge control and charge referencing techniques in x - ray photoelectron spectroscopy
X射线光电子谱测定中电荷控制和电荷参照技术标准指南 - In order to investigate the interfacial reaction of high - k thin film on si substrate , the high - k samples were studied by xps as a function of annealing temperature
为了考察high - k物质与si基底的界面反应，以温度为函数，对样品进行xps光电子谱线测定。 - Gas permeability tester and mechanical folding device were developed to study the barrier property and deformation failure behaviors . the surface characterization , chemical structure , optical , mechanical properties of pet coated with dlc have been investigated by x - ray photoelectron spectroscopy ( xps ) , contact angle measurement , light transmission analysis , nanoindentation and friction wear tests
通过x射线光电子谱分析、接触角测定、光学透过率分析、纳米压痕、摩擦磨损试验、机械弯折试验、气体透过率试验,对膜层的表面特征,光学、力学及气体阻隔性能进行了系统的研究。 - Current researches , applications , preparation and structure of si3n4 are summarized in this paper . a new conclusion is drawn that silicon wafer can react with nitrogen at the temperature higher than 1100 and in super - pure nitrogen by direct - nitridation of silicon at the temperature from 800 to 1200 . the prepared silicon nitride samples are tested by xps ( x - ray photoelectron spectroscopy ) , sem ( scanning electron microscopy ) , optical microscopy , xrd ( x - ray diffraction ) and edx ( energy dispersive x - ray analysis )
通过硅片在800到1200各个温度和各种氮气气氛下的氮化处理的实验结果，报道了不同与其他研究者的氮化条件，硅片在氮气保护的热处理中的氮化条件为：高于1100的温度和高纯氮的气氛条件，同时对该氮化硅薄膜进行了金相显微镜、扫描电镜( sem ) 、 x射线衍射仪( xrd ) 、 x射线光电子谱( xps ) 、 x射线能谱仪( edx )和抗氧化性等测试和分析。 - After these processes , silver doped sca antibacterial stainless steel is prepared . the samples are investigated with sem ( scanning electron microscope xrd ( x - ray diffraction ) , xps ( x - ray photoelectron spectroscopy ) , contact angle test , erosion test , mechanism performance test and antibacterial test , and the relation between structure and property is discussed
对制得的抗菌不锈钢进行扫描电镜、 x射线衍射谱、 x射线光电子谱、接触角、耐蚀性测试、膜层机械性能测试、抗菌性能测试等分析，讨论了样品中膜层结构与性能间的关系。