×

体弹性 meaning in Chinese

volume elasticity

Examples

  1. A semi - empirical tire model of transient cornering properties with carcass elasticity considered
    考虑胎体弹性的轮胎动态转向特性半经验模型
  2. Identification algorithm of elastic parameters of rock body in slope based on improved bp neural networks
    基于改进神经网络的边坡岩体弹性力学参数识别方法
  3. The research results indicated that it is the protection against outburst mechanism of the measure that elastic potential of coal is slowly released , zone of stress concentration is moved forward , length of stress relief zone is increased and the quantity of gas emission is reduced after injecting water
    研究结果表明:该措施的防突机理在于注水后,煤体弹性潜能释放缓慢,集中应力带前移,卸压带加长,瓦斯涌出量减小。
  4. This paper first conducts the research to the steel wire roller conveyer ball bearing rolling body and the steel wire roller conveyer spot contact question , gives the main geometry parameter of the zone of contact by the hertz contact theory , stress extreme value as well as contact body elasticity approach quantity formula , and acts according to the practical application to carry on the simplification , calculates the main parameter of the bearing zone
    本论文首先对钢丝滚道球轴承滚动体与钢丝滚道的点接触问题进行研究,由hertz接触理论给出接触区的主要几何参数,应力极值以及接触体弹性趋近量的计算公式,并根据实际应用进行简化,计算出课题所研究轴承接触区的主要参数。
  5. Elastic - plastic analysis for soil around anchor jacked pile in this paper , the course of penetration is regarded as expansion of cylindrical cavity in infinite soil mass . combining with the knowledge of elastic mechanics and plastic mechanics , we can make analysis for soil around pile . finally , we can educe the cylindrical cavity pressure , radius of plastic zone , radical displacement in elastic zone , excess pore water pressure in soil around pile and spherical cavity pressure at the end of pile
    锚杆静压桩桩周土体的弹塑性分析该部分是文章的主要工作所在,本文把压桩过程桩周土体的本构关系看作是水平面的平面应变小孔扩张问题,利用小孔扩张原理,结合弹性力学以及塑性力学的知识,对压桩后土体的性状作出分析,得出桩对土的挤扩作用力、桩周土体塑性半径、弹性区的位移,压桩完成瞬时桩周土体弹性区和塑性区的超孔隙水压力以及桩端球形孔扩张的扩张力。

Related Words

  1. 弹性
  2. 体大
  3. 体大思精
  4. 体蛋白正常
  5. 体的
PC Version

Copyright © 2018 WordTech Co.