乙炔黑 meaning in Chinese
acetylene black
acetylene smoke
Examples
- Acetylene black for batteries
蓄电池用乙炔黑 - When the amount of pvdf and acetylene black is 7 ~ 10 % and 8 % , the positive plate obtained possesses optimum properties in our studies
本研究中pvdf粘结剂的添加量在7一10 % ，乙炔黑导电剂的添加量在8 %左右，正极极片的性能最佳。 - The results give that the positive plate takes on preferable charge - discharge properties only when the amount of additive of pvdf and acetylene black is suitable
结果表明，正极极片中pvdf粘接剂和乙炔黑导电剂的添加量只有适量的时候，正极极片的充放电性能才较好。 - Orthogonal tests of waterproof and gas diffusion were taken to option the mass ratio of composition , and meticulous tests of each factor were taken too . scanning electric microscope was used to observe the surface pattern . finally the best composition was found
实验以正交试验的方式确定了防水透气层组成并对单因素进行了考察,并用sem观察表面形貌,最终确定防水透气层组成活性碳、 ptfe 、造孔剂、乙炔黑的质量比为5 . 00 : 2 . 00 : 6 . 00 : 5 . 00 。 - The influences of other factors ( the charging - discharging current density , the granularity of a30 00 , the content of acetylene black and the content of ptfe ) on the charging - discharging performance of sample a3000 were also investigated by the orthogonal method through galvanostatic charging - discharging experiments
结合恒电流充、放电实验，采用正交法分析了充、放电电流密度、 a _ ( 3000 )试样的粒度、炭膜中乙炔黑的含量和ptfe的含量对a _ ( 3000 )试样的充、放电性能的影响。