×

临界厚度 meaning in Chinese

critical thickness

Examples

  1. Critical thickness analysis of base plate gushing in cylindrical foundation pit with confined water
    承压水作用下圆形基坑底板突涌的临界厚度计算公式
  2. High strength and stiffness can be achieved only in polymer films thinner than a critical thickness . the relationship between the microstructure and mechanical behaviors of conducting ppy films was described based on sem techniques at the first time
    同时,这些导电高分子薄膜材料的力学性能受薄膜厚度的影响:在某一临界厚度内其力学性能非常优异,超过这一厚度力学性能有所下降。
  3. Prior to the growth , the critical thickness , which plays a vital role in the formation process of qd , is numerically calculated in terms of the strain relaxation , and the growth is carried out under the guidance of the calculated results
    在stranski - krastanow ( s - k )模式下制备了zncdse量子点,在生长量子点之前,先数值计算了系统的临界厚度,然后在该临界厚度值的指导下进行了量子点的制备。
  4. By reading papers on debris flow ' s triggering and confluence , we know that if we consider debris flow ' s triggering and confluence as a whole system , its whole process have many critical characteristic situation . such as , critical slope grade , critical thickness of earth source , critical precipitation , critical runoff and critical velocity of flow
    本文通过对泥石流产汇流研究现状的分析得知,泥石流的产汇流可作为一个系统来研究,泥石流产汇流过程具有一系列临界特征值,如:临界坡度、土源临界厚度、临界雨量、临界流量和临界流速。
  5. The theoretical calculation and explanation of strain behavior during heteroepitaxy of oxides thin films : when the lattice mismatch is relative small ( for example , batio _ 3 / srtio _ 3 with a lattice mismatch of 2 . 18 % ) , the growth mode of thin films is layer - by - layer , and the critical thickness and strain relaxation can be calculated or estimated by matthews - blakeslee expressions ; when the lattice mismatch is large ( for example mgo / srtio _ 3 with lattice mismatch of 8 % ) , the strain relaxation process can be explained by theory of coherent strained islands
    氧化物薄膜异质外延应变行为的理论预测和解释。对于晶格失配较小的外延体系(如batio3 / srtio _ 3 2 . 18 % ) ,薄膜以层状方式进行生长,临界厚度和应变释放过程可以用经典的matthews - blakeslee公式进行预测;对于晶格失配较大的体系(如mgo / srtio _ 3 8 % ) ,薄膜以岛状方式进行生长,应变释放过程可以由弹性应变岛的理论体系进行解释。
More:   Next

Related Words

  1. 成品厚度
  2. 临界临界电流
  3. 临界测量
  4. 临界塑性变形
  5. 临界信息
  6. 临界热流
  7. 临界成分
  8. 临界航程
  9. 临界相对湿度
  10. 临界检测
  11. 临界横倾
  12. 临界恒温线
  13. 临界后的
  14. 临界滑动圆
PC Version

Copyright © 2018 WordTech Co.