feedthrough meaning in Chinese
馈穿
馈孔
馈入装置;馈通;连接线
联结线直通的
联通线
连接线直通的
送进
Examples
- Magnetic coupled feedthrough
磁耦合旋转馈通 - Proper stabilization of generalized decentralized systems with direct control feedthrough
前馈广义分散控制系统的真镇定 - By use of coupling - of - modes model , this paper computers the characteristic impedance , then puts emphasis on the feedthrough effect which affects saw performance and some advice is given
本文就是顺应军用和民用技术需求进行的工作,通过耦合模模型求解了saw滤波器的特征阻抗,由此重点研究了影响saw器件性能比较严重的电磁直通效应,并提出了改善措施。 - 2 . the control signals couple through the capacitance of the switches to the output , the dynamic error caused by the parasitic gate ? drain feedthrough capacitance is significantly lowered by the use of a reduced voltage swing at the input of the switches
2 .差分开关的控制信号会通过晶体管的寄生电容耦合到输出,从而影响dac的动态性能,设计中通过降低控制信号电压的方法来解决这个问题。 - Before now because operating frequency was low , suppose that electrode in saw device has no thickness and thus second order effects are ignored . these second order effects , including electromagnetic feedthrough , triple transit interference , body acoustic wave , reflection and so on , affect the performance of saw device in high frequency . so it is important that second order effects are researched and improved in depth
这样的需求要求了saw设计者考虑在低频时未加考虑的二阶效应,大多数以前的分析假设电极无厚度而忽略了的二阶效应(电磁直通、三次行程干扰、体声波、声电再生等)在高频时对saw器件的性能影响较大,要求对其二阶效应进行深入研究并对其进行改善。