bauschinger meaning in Chinese
鲍申格尔
Examples
- Influence of bauschinger effect on springback in sheet metal stretch bending
包辛格效应对板材拉弯回弹的影响 - Meanwhile , bauschinger phenomena could be modeled because the grains have random orientation . it was demonstrated that crack could grow under far field cyclic compression load in experiments
本文对不同几何形状的裂纹在循环压缩载荷下的萌生、扩展行为进行了数值模拟分析。 - Simulating on polycrystalline cyclic deformation indicates that hardening first appears at grain boundary then spreads to grain inside . finally , hardening is not well - distributed in the specimen when deformation is limited
循环塑性模拟对于多晶材料的bauschinger效应和晶粒间硬化过程以及硬化在试样上的非均匀分布给出了相应的描述。 - According to the complication of cyclic loading the aeolotropism and bauschinger effect resulted form plastic deformation were reflected by the kinematic hardening model , the transient stress - strain relation was described by jhansale model in the iterative formulas
在迭代格式中，针对复杂的交变载荷，采用运动强化模型，反映了塑性变形引起的各向异性和包辛格效应，运用jhansale模型描述材料的瞬态应力应变关系。 - While cyclic deformation experiment under constant strain control is performed in 400 , the material shows the continuous hardening until cyclic invalidation . ( 3 ) back stress attained by kwl " s method is used to analyse the bauschinger effect during an incremental step cyclic test and cyclic deformation test under constant strain control , it is shown that back stress increases with increasing plastic strain and the numbers of cycle , and the back stress is uniform , regardless of tension or compression conditions . ( 4 ) as far as recrystallized zircaloy - 4 plate is concerned , the back stress in transverse direction is higher than that in rolling direction due to the higher schmid factor in rolling direction
对于再结晶状态的zr一4合金板材试样来说， t方向(横向)试样的背应力要高于r方向(轧制方向)的背应力，原因在于r方向的schmid因子高于t方向的schmid因子; 400下， zr一4合金的背应力要明显低于室温下的背应力;含氢200pg / g的zr一4合金的背应力大小与无渗氢的zr一4合金背应力相比，无明显区别;固溶处理后， zr一4合金的背应力大小发生了变化，在较高塑性应变下，背应力均高于固溶处理前的背应力。