| 1. | Intensity check for high stress belt
高强度输送带的强度校核 |
| 2. | The practical requirements in construction may be met through the analysis on the stability and intensity of the system
经过稳定性分析和强度校核，满足工程实际需要。 |
| 3. | According to the structure of this tunnel , the strength is checked and the security of structure is validated
针对此脉冲风洞的基本结构,本文对风洞进行了强度校核,验证了风洞结构的安全性。 |
| 4. | The new formula that drilling rod stress and intensity of drilling rod checked that this paper derived , have important theory meaning and actual meaning
本文推导的钻杆应力及钻杆强度校核的新公式，具有重要的理论意义和实际意义。 |
| 5. | The general design plan of cad of the effective crusher fine grained and the program flows are proposed and the exploitation method of the software is presented
并对其进行了强度校核。提出了高效超细破碎机cad总体设计方案和程序流程，并探讨其cad软件开发。 |
| 6. | The strength of legs of a jack - up drilling platform serviced in bohai sea is evaluated and the ice - induced fatigue damage of the platform leg under different ice parameter was determined
对渤海某自升式钻井平台桩腿进行了强度校核，计算出不同海冰参数下平台桩腿的冰激疲劳损伤。 |
| 7. | Besides , this paper presents the designs for the twin - floater ocean wave generate electricity device , and verifies the intensity of the floating arm which is important for the design
本文给出双浮子海浪发电装置的总体设计简图以及其设计结构图，并对设计的关键部分?浮子臂进行强度校核。 |
| 8. | Abstract : mechamical calculation method for jacket vessel with spiral plate , spiral plate setting and strength check were discussed , it shows that spiral plate can be used as stiffening ring
文摘:介绍带螺旋导流板的夹套容器强度计算方法、螺旋导流板的设置及强度校核等，螺旋导流板可起到加强圈的作用。 |
| 9. | And at the end of the article , using the finite element add - in to verify the feasibility of helix rotor that is the key part in roots blower
接着，针对罗茨鼓风机的关键零件：扭叶转子，再利用solidworks软件的有限元分析插件，对扭叶转子进行强度校核，从而验证了设计的可行性，减小了不合理设计出现的可能性。 |
| 10. | The traditional construction of structure and verification of intensity is based on fixed value analysis , in another words , the geometrical size , physical performance and the load of structure are all fixed values
传统的结构设计和强度校核是基于确定性分析，也即结构计算时假定结构的几何尺寸、材料的物理性能以及所受的载荷都是确定值。 |
