| 1. | An efficient method to analyze signal integrity in high - speed clock circuit
一种分析高速时钟网络信号完整性的有效方法 |
| 2. | The surrounding circuits design mainly includes the clock circuit , mute circuit and antenna switching circuit
其中外围电路涉及到时钟电路、静音电路和天线切换电路的设计。 |
| 3. | Abstract : trigger circuit , power supply circuit , clocking circuit and reset circuit are the main circuits on the main board
摘要：触发电路、供电电路、时钟电路、复位电路是主板上最主要的电路。 |
| 4. | Zero - delayed clock buffers are adopted in clock circuit so that it can meet the various clocks ’ requirement needed by the system
时钟电路采用零延时的时钟buffer ,能很好的满足各种时钟的同源/同相要求。 |
| 5. | The hardware circuit is designed for the system , including the power module , clock circuit module and jtag interface
对整个系统的硬件电路进行了设计,包括相应的电源模块、时钟电路模块、电平转换模块和jtag接口。 |
| 6. | The detailed functional modules consist of pci protocol conversion module 、 driver and magnifying module 、 control logic 、 clock circuit and configuration circuit
具体的功能模块包括pci协议转换模块、驱动放大模块、控制逻辑、时钟电路fifo电路和配置电路。 |
| 7. | In this paper design of some circuit including in a / d circuit is also analyzed , such as front analog circuit , sample clock circuit and data flip - latch circuit
同时对高速转换器件及转换电路中包括前端模拟电路、采样时钟、后端数据锁存等辅助电路设计进行了分析。 |
| 8. | In this system , high speed clock is produced by the clock circuit when acquiring and feeding back signal . the required clock is produced by the pc program when communicating
在本系统中采集和回放时所需的高速时钟由时钟电路产生，通讯时所需的时钟则由上位机的程序产生。 |
| 9. | The hardware design section mainly introduces the circuit design , including the peripheral circuit design of pm5366 and pm4329 and the design of clock circuit and interrupt circuit
硬件设计部分主要介绍电路的设计,包括pm5366和pm4329的电路设计,以及时钟电路和中断电路的设计。 |
| 10. | Through clock circuit of hardware and device driver program of software , this paper realizes real - time cortrol , moreover , by making use of event synchrocyclotron mechanism , resolves the interrupt problem
摘要运用硬件上的时钟电路和软件上的设备驱动程序实现了实时控制，并采用事件同步机制解决了中断问题。 |
