| 1. | Zero - dimensional arrays are not supported
不支持零维数组。 |
| 2. | 5 . according to tiansha river ' s water diversion and flow strengthen project that is determined by zero - dimensional model , the plan of tidal river networks is successfully calculated
紧密结合江门市天沙河引水增流工程项目，根据零维模型确定的方案，对感潮河网进行了方案计算。 |
| 3. | The simulation results show that the model can reflect the distribution of heat flow density under the dissimilarity load , and then made up the shortage of zero - dimension model and three - dimension model
通过在不同负荷下的仿真计算，说明了该模型能够反映不同负荷下炉膛内的热流密度分布的不同，从而弥补了零维模型和三维模拟的不足。 |
| 4. | After a detailed analysis of the characteristics of zero - , quasi - , and multi - dimensional models of direct injection diesel engines , we make proper simplifications on the quasi - dimensional combustion model
本文在详细分析了模拟直喷式柴油机燃烧过程的零维模型、准维模型和多维模型各自的特点后，对柴油机的准维燃烧模型作了合理简化。 |
| 5. | The falling rate of t _ ( d - ) p curve closely related with e / p or the energy of laser pulse ( e _ ( laser ) tested . the threshold voltage did n ' t depend on the pressure apparently . the delay and jitter decreased exponentially as the e _ ( laser ) increased
C :建立了零维“ 2光子激发一2光子电离”激光触发火花隙数值模拟模型与考虑了levison修正的t . h . martin经验公式相结合的激光触发多级开关零维数值计算模型。 |
| 6. | In order to macroscopically decide the possibility of water diversion and the effect of water quality renewal , zero - dimensional hydraulic and water quality model was built . this model was used to analyze the river networks " capability of water diversion and drainage
建立零维水力和水质模型对河网的引、排水能力进行分析，以便从宏观上确定引水增流的可能性以及水质的更新效果，初步确定工程的可行性。 |
| 7. | In our work , we select zero - dimensional nanomaterial ( sio2 and caco3 ) and one - dimensional nanomaterial ( at ) . after surface modification of these nanoparticles , we composite them with polymer ( polypropylene , polyethylene and polyvinyl chloride ) and prepare nanocomposites
本工作选用零维纳米材料( sio _ 2andcaco _ 3 )和一维纳米材料(凹凸棒土棒晶) ，对它们进行偶联剂或聚合物包覆改性后，分别与聚合物(聚丙烯、聚乙烯和聚氯乙烯)进行复合制备纳米复合材料。 |
| 8. | The general basin flood model is deduced by analogy between the matter composing of atom and it composing of character objects . the character objects are follow : one dimension flow model , two dimension flow model , zero dimension flow model , linking flow model , engineering control flow model and so on . the different character objects make up of the different basin model
通用性流域洪水演进模型采用类比物质构成的分解，把流域分解成各种基本特征元素的模拟：一维水流模拟，二维水流模拟，零维水流模拟，连系水流模拟以及工程运行控制模拟等，由不同的特征元素的数量和种类的组合，构成不同的特定流域，使所建的流域洪水模型具有很好的包容性，能够包容各种各样的流动结构，适应不同的流域洪水模拟的需要。 |
| 9. | ( 3 ) chapter v . plasma characteristics of rf ion source is investigated . a zero - dimensional numerical dynamic colisional radiative atomic and molecular ( cram ) model is suggested to simulate the microphysical process . all species " population number densities in plasma are calculated in non - thermodynamics equilibrium condition , and proton content in extracted ion current are measured with 60 ? magnetic analyzer
( 3 )提出了高频离子源等离子体的零维cram模型( collisionalradiativeatomicandmolecularmodel ) ，计算了非平衡态( nte )下等离子体中分子、电子、离子、基态原子、激发态原子等粒子浓度，并在zf - 200kev中子发生器上，用60磁分析器实验测定了引出束流的质子比。 |
| 10. | Using the numerical computation method to simulate the pure air flowing in the plasma generator and using zero dimension theory and continuous medium hypothesis to establish the mathematical model of the plasma generator and applying the curvilinear coordinate to disperse the space of the plasma generator , applying simplec method to solve the set of discredited equations
应用数值计算的方法模拟了等离子发生器内部的纯空气流动，应用零维理论分析模型和连续介质假设建立了描述等离子发生器内部流动和传热的数学模型；采用贴体坐标系对等离子发生器的流场空间进行空间离散；采用simplec算法来求解离散方程，获得流场的数值解。 |
