| 1. | The thesis studies the displacement and force characteristics of the ipmc actuator
本文研究了ipmc的一些重要特性,如位移特性和输出力特性。 |
| 2. | Air braking systems ; air - pressure cylinder ; brake chamber , method of measurement of the output - force over the stroke
空气制动系统.气压缸.第10部分:制动箱冲程输出力的 |
| 3. | Relation between temperature and output force displacement is determined by constitutive relation of sma
Sma驱动器温度与输出力、输出位移之间的关系由sma本构关系决定。 |
| 4. | The relations of recoil mass to output force and recoil force was obtained based on the experiments
摘要在试验的基础上得出手提式电磁铆枪回弹体质量对输出力和后坐力的关系。 |
| 5. | This new - active member includes a piezoelectric actuator , a micro - placement sensor to measure the output placement and output force
该主动构件由压电作动器、传感器等组成，具有输出位移和输出力的功能。 |
| 6. | A gearing mechanism of a motor vehicle engine that reduces the power output required to maintain driving speed in a specific range by lowering the gear ratio
（汽车的）超速档机动车辆的一种齿轮装置，通过降低齿轮比率来减少为将车速保持在一定范围内而需要的输出力 |
| 7. | The experimental results showed that under certain conditions of preloaded press and bias magnetic field , a satisfied static characteristic was obtained
试验结果表明超磁致伸缩致动器在合适的偏置磁场及预压力作用下，能达到较佳的输出电流-位移及电流-输出力响应特性。 |
| 8. | Meanwhile , the output control forces are identical if the used actuators have the same capacity limitation , and those certainly simplify the design of controllers and let the multi - control system not to be used
并且当采用同样容量限的多个作动器时，控制输出力一致，从而避免设计多个控制系统，简化了控制器设计。 |
| 9. | A new type piezoelectric active member adopted in the thermo - modality control of intelligent structure was designed and manufactured . and the relations between its working properties , output displacement , output force , etc . and various influence factors were studied through experiments
设计制造一种可用于智能结构热动态控制的新型压电主动构件，并通过实验研究其工作性能：输出位移、输出力特性与各种影响因素之间的关系。 |
| 10. | When the electrohydraulic push rod works , if the external force suffered by the piston rod is more than the setting output torque , the piston moves to the end ; oil pressure in the oil pipeline increases rapidly to the setting value , the safety valve overflows rapidly , to achieve overload protection
电液推杆工作时，当活塞杆所受外力超过调定的输出力距活塞运动到终点；油路中的油压迅速增高至调定值，安全阀迅速溢流，实现过载保护。 |
