English translation for "裂缝面"

fracture face
fracture plane

Related Translations:

风干裂缝:  season checkseason cracking

轧制裂缝:  rolling crack

结构裂缝:  structural cracks

正交裂缝:  orthogonal fracture

裂缝填充:  fissure filling

裂缝孔隙:  fracture pore

冷裂缝:  cold crackcold seaming

混凝土裂缝:  distress in concrete

裂缝孔:  slit-pore

坍陷裂缝:  collapse fissure

Example Sentences:

	1.	In the past , a large number of work concentrated on the statistics law of crack under two - dimention state 过去的大量工作主要集中在平面状态下，裂缝面迹线的统计规律研究。
	2.	The fracture energy gf of concrete is one basic material characteristic , representing the energy necessary to create a unit area of fracture surface 混凝土断裂能g _ f是材料的一个基本性能，表示扩展单位裂缝面所需要的能量。
	3.	Since there was no technique to observe directly under three - dimensional situation and no reliable physics exploiting technology , the three - dimension distribution law of crack face was not found yet 三维情况下，由于无法进行直接观测，又缺乏可靠的物理测试技术，致使岩体裂缝面的三维分布规律远没有得到解决。
	4.	7mpa / km in the center of the zone ( 6 ) in the hot dry rock geothermal energy extraction system , after the system start to operate , the normal stress of crack show the pronounced influence depending on the temperature ' s change in a month , there are a marked drop in temperature nearby the injection well , forming a lower stress area , with the heat extraction , the temperature ' s change even gradually , but the temperature descend quickly nearby the production well , forming a new lower stress area ( 6 )高温岩体地热开发中，裂缝面法向应力受温度变化的显著影响，在系统开始运行的一个月内，注入井附近区域其温度降低较快，形成低应力区;随开采时间的延长，其温度变化逐渐平缓，而生产井附近区域温度降低加快，逐渐形成新的低应力区。
	5.	3 , carry out detailed numerical simulation and analysis for heat extraction of deep - seated hdr based on the tengcong prefecture , reach the major variety rule of rock mass stress , temperature , fracture width depending on the heat extraction . ( 1 ) in the hot dry rock geotherraal energy extraction system , transportation of energy and flow of water arise mainly through the fracture , the lower temperature water attain the high temperature from the injection well to production well through conduction convection and take away the thermal from wall rock 3 、认真地对腾冲高温岩体地热开发进行了数值模拟计算和分析，得出了地热开发过程中岩体应力、温度以及裂缝宽度随地热提取的变化规律等重要结论： ( 1 )在高温岩体地热开发系统中，能量的运移、输送与水的流动主要通过裂缝面发生，注入的低温水在流到生产井的过程中，发生传导、对流、吸收围岩热量，达到升温的目的。
	6.	The surface of natural fracture ( crack ) is parallel to the orientation of maximum principal stress . the principle orientation of anisotropic permeability reservoirs agrees with the orientation of the maximum principle stress . many engineering problems ( e . g . bore - hole stability , casing deformation failure during drilling , reasonable arrangement of wells , the optimum design of hydraulic fracture and so on ) are influenced by the in - situ stress orientation 天然裂缝面和裂隙面与最大主应力方向平行；在各向异性低渗透率油田中主渗透率方向与最大水平主应力方向趋向一致：在钻井过程中井壁稳定性，套管变形和损坏，油田开发井网合理布置、水力压裂优化设计等都与地应力方向有关。
	7.	The distribution characteristic of the crack face in rock mass was a important and difficult problem in mechanics of rock mass and engineering , the nature of crack face determined the transmogrification , stability , breakage laws and the seepage nature of rock mass directly , so the research had great value in theory and practicality 岩体裂缝面的分布形式是岩体力学与工程中重要和艰难的问题，裂缝面的形态直接决定了岩体的变形、稳定性及其破坏规律，决定了岩体的渗流规律，因此，这项研究具有很大的理论价值和实用价值。
	8.	2 ) through many numeral experiment , using the crack face ' s slant angle and azimuth angle as parameters , we found some relations between three - dimension fractal parameters and two - dimension fractal parameters in rock mass : ds = ( 1 . 0 + 0 . 031 ) * dl + ( 1 . 0 + 0 . 0395 ) , ns = nl , v = 1 . 5986 * ( 2 - dl ) - 3 . 2935 * sin ( st ) + 3 . 8263 , and found a way to speculate three - dimension fractal parameters from two - dimension fractal parameters . lt is the foundation to describe the distribution laws of crack face in rock mass by the observing results through rock mass section crack , 3 ) this paper constructed the three - dimensional fractal emulation theoretical system and erected three - dimensional fractal emulation model about crack face in rock mass 4 ) a emulation system about crack face in rock mass is developed by vc + + , it includes the function to get section plane chart and section block chart from three - dimensional network chart automatically , and some of the emulation examples is given 2 )通过大量数值试验，以岩体裂缝面的倾角与方位角为纽带，分析得出了岩体裂缝面数量三维分形分布参数和岩体裂缝迹线二维分形分布参数的关系： d _ s = ( 1 . 0 0 . 031 ) * d _ l + 1 . 0 0 . 0395 ， n _ s = * n _ 1 ， = 1 . 5986 * ( 2 - d _ l ) - 3 . 2935 * sin ( st ) + 3 . 8263并提出了由二维分形几何参数来推导三维分形几何参数的方法。为通过岩体剖面裂缝直接观测结果，描述岩体裂缝面分布规律奠定了基础。 3 )本文构建了岩体裂缝面的三维仿真理论体系，建立了岩太原理二大学周眨d二研究生学位论文体裂缝面的三维分形仿真模型。
	9.	The main crack of tiaohu formation are straight oblique - cracks and level crack , there are many scores in the crack . the length of cracks is long , and they cut across several layers . the average surface density of the cracks is 0 . 101 slips / m . the cracks in lucaogou formation is mostly net cracks , and there are solution on crack surface 条湖组的裂缝多为平直的斜交缝和水平缝，缝面多见擦痕，延伸长度大，切穿多套地层，裂缝面密度平均为0 . 101条米；芦草沟组裂缝多为网状裂缝，缝面有溶蚀现象，多存在于碳酸盐岩内，裂缝面密度平均为0 . 143条米。
	10.	As the yardstick changes of crack face is following self - similarity physics law , this paper prosecuted several deep researches on the crack face in rock mass as follows : 1 ) the fractal geometry theory is used to study the characteristic of crack face number in rock mass and a research method about three - dimension fractal distribution to crack face in rock mass was brought forward . we calculate the number of crack when the position of the crack face distribution is random and the crack face ' s slant angle and azimuth angle is certain by numeral experiment , and verify that the crack face number in rock mass comforming three - dimension fractal distribution law is correct 1 )应用分形几何学理论对裂缝面数量分形分布进行了研究，提出了岩体裂缝面数量的三维分形分布研究方法；在岩体裂缝面随机分布和裂缝面分组的情况下，用数值试验方法，分别计算各种剖面不同尺度裂缝迹线条数，证明了“岩体裂缝面数量服从三维分形分布规律”这一岩体力学的重要物理结论。

Similar Words：

"裂缝扩张力" English translation, "裂缝率" English translation, "裂缝脉" English translation, "裂缝蔓延" English translation, "裂缝密度" English translation, "裂缝面粗糙度" English translation, "裂缝面平均粗糙度" English translation, "裂缝面倾斜度" English translation, "裂缝敏感度" English translation, "裂缝敏感性" English translation