English translation for "脱模剂"

demoulding agent
form release agent
form release compound
form-release compound
formwork oil
mold discharging agent
mold dope
mold lubricant
mold parting agent
mold release agent
mold releasing agent
mold-release agent
mould discharging agent
mould dope
mould parting agent
mould release agent
mould releasing agent
mould-release agent
parting compound
parting medium
remover
separating compound
separating material
separator
stripping compound

Related Translations:

脱模销:  ejectorstripper pin

脱模钳:  wiper

脱模负荷:  ejection load

手工脱模:  hand ejection

脱模油:  form oilmold oilmold-releasing oilmould oil

脱模强度:  demoulding strengthstripping strength

脱模性能:  demoldabilitydemouldability

脱模操作:  stripping actionstripping operation

脱模粉:  separating powder

气动脱模:  compressed air ejection

Example Sentences:

	1.	The stickiness tends to disappear on standing . 搁置时脱模剂的粘性易于消失。
	2.	If the mold spray is sticky, reduce the silicate . 如果脱模剂发粘，则减少硅酸盐。
	3.	Cork mold spray solutions have a tendency to deteriorate or ferment . 软木粉脱模剂溶液易于变质或发酵。
	4.	In all the formulas for mold spray, a common ingredient is water . 在给出的所有脱模剂配方中，水是共用的拼料。
	5.	It is difficult to set down an exact formula because cork is a natural product . 要确定脱模剂的精确配方是困难的，因为软木是一种天然产物。
	6.	Some molders believe a mold spray is of no value until it has a real vile odor . 一些铸造工人认为，除非脱模剂发出十分令人作呕的气味，不然就毫无价值。
	7.	It is the usual custom for each battery manufacturer to make his own spray from materials obtained locally . 各蓄电池生产厂都习惯采用从当地获得的材料配制脱模剂。
	8.	Too much water reduces the adhesion and too little piles the material up too thick on the mold surface . 水太多会减少粘附力，加水太少则会使脱模剂在模具表面堆积太厚。
	9.	Experience will dictate how to vary the mold spray formula in accordance with casting results but do so very slowly . 根据铸造效果，可以凭经验改变脱模剂的配方，但这样很慢。
	10.	Mold spray life, with some of the formulas mentioned above, should be at least several hours with some touched up with the spray gun . 用上述配方配制的脱模剂，用喷枪喷涂，其有效期至少可达几小时。

Similar Words：

"脱模工位" English translation, "脱模后的收缩" English translation, "脱模后收缩" English translation, "脱模机" English translation, "脱模机构" English translation, "脱模剂, 模润滑剂, 模型油" English translation, "脱模剂,离模剂" English translation, "脱模剂；剥离剂" English translation, "脱模剂；隔离剂" English translation, "脱模剂过量" English translation