English translation for "时法"

time sharing method

Example Sentences:

	1.	Dielectric strength short time at 23 常态，短时法
	2.	By the " high temperature short time method " , namely , by retaining milk or a milk beverage for a period of not less than 15 seconds at a temperature of not less than 72 以“高温短时法”进行，即先将奶类或奶类饮品在不低于摄氏
	3.	By the " high temperature short time method " , namely , by retaining milk or a milk beverage for a period of not less than 15 seconds at a temperature of not less than 72 以“高温短时法”进行，即先将奶类或奶类饮品在不低于摄氏
	4.	To consider the efficiency of charge of the mh - ni battery , this method revises the ah - methods . the battery management system realized to compensates the charge efficiency through a constringent factor 考虑到高比功率镍氢电池的充电效率，该方法将一般的安时法加以修正，通过一个变压缩因子实现充电效率补偿。
	5.	This paper presents a method to measure the battery capacity based on an ampere - hour method , and discusses the compensation for temperature and battery aging along with the sysytem design and its implementation 摘要根据安时法提出了一种电池电量的检测方法，讨论了温度、电池老化的补偿措施，并给出了系统的软硬件设计方法。
	6.	The characteristics of the normal equation created in recovering the earth gravity model ( egm ) by least - squares ( ls ) adjustment from the in - situ disturbing potential has been discussed in detail 摘要讨论了在基于能量法确定地球重力场模型的过程中，利用最小二乘方法由沿轨扰动位数据解算位系数时法方程的特性，在该问题中，法方程只与卫星轨道有关。
	7.	Based on these , this paper puts forward a new method of measuring residual capacity of the electric vehicles traction battery . namely using ampere - hour , open - voltage and the adaptive neural fuzzy inference system ( an fis ) method , correct the actual capacity to get the exact result 在此基础上提出了一种新的监测蓄电池剩余容量的方法，即结合安时法、开路电压法和自适应模糊推理法，对蓄电池的实际容量进行校正，达到准确预测电池的剩余容量的目的。
	8.	This article describes a way of special ultrasonic system which monitors thermal stress in seamless welded rails . this monitoring system is a non destructive testing system , which adopts avr mcu and high - precise time chip processing as the core of it , and adopts the critically refracted longitudinal wave as the object of measuring . my studying focuses on the theory of the monitoring system , which will be listed in this arctile : according to the snell theory , the theory of motivating of critically refracted longitudinal wave is described in details , and the finite element software is used to emulate the propagating course . the formulas of calculating the pts of swr are taken from the acoustoelasticity theory , and the calculating the parameters is introduced . according to assemble materials , three kinds of ways of monitoring the pts of swr using critically refracted longitudinal wave are described , which are measuring the sound - time in changeless distance , ultrasonic critical - angle refractomery and frequency spectrum , the first way of ways is used in this experiment system . the factors , which effect the monitoring system , are assaid in some degree based 本文的研究工作重点在无缝焊接钢轨温度应力测量系统的理论模块,包括根据snell原理,研究极限折射纵波的激发机理,并使用有限元软件ansys进行仿真;根据声弹性理论以及公式推导出计算无缝焊接钢轨中的温度应力的公式,并对其中参数的求解方法进行介绍;根据收集的资料,介绍了三种使用极限折射纵波测量无缝焊接钢轨温度应力的方法,即固定距离测量声时法、临界角折射法和频谱分析法,本实验系统使用的是第一种;根据实验经验以及相关资料,分析了影响极限折射纵波测量温度应力的几个因素,并提出了相应的解决方法;根据实验系统的需要,独立设计并加工出相关配套的实验设备,包括实验钢块、有机玻璃楔块、固定件、载荷外框装置等。
	9.	Time standards for nkr front axle assembly line , jap , is reset based on modapts , and time unit is reduced , and capability of the line is induced . the balance rate of the assembly line is developed from 62 % to 76 % by process elimination , combination , rearrangement , and simplification applied with rules for motion economy and eff iciency 论文应用模特排时法对江铃车桥厂nkr前桥装配线重新制订工时定额标准，降低装配线生产节拍，提高装配线生产能力，按照动作经济原则，通过工序剔除、合并、重排、简化使前桥装配线作业平衡率由62提高到76 。
	10.	Firstjap background and nkr front axle assembly line problems , non - meet demands and unbalance , is introduced , and modapts is suitble and important for the development of assembly line . secondly , theorials on work study , set time standards and process balance is reviewed , and current workshipment , operation motion capability . balance rate is revealed based on the investigation . according to work study theory , typical seven motions analysis is detailed , and operation method standards is designed . according to the human - machine theory , noise , light , tools , facilities factors is analysised , and conditions reducing production rate is advanced 本论文采用理论与实践相结合的方法，运用工业工程、人机工程学有关工作研究、方法研究、劳动定额、模特排时法等理论和方法，在分析大量文献资料的基础上，参考国内外在工业工程方面的最新研究和应用成果，对江铃车桥厂nkr型汽车前桥装配线的组织设计进行了系统的重组和优化设计研究。

Similar Words：

"时而也被冬日阳光般的微笑所融化" English translation, "时而云内时而云外" English translation, "时二" English translation, "时二郎" English translation, "时发时散翳" English translation, "时反应" English translation, "时反应量效关系" English translation, "时范" English translation, "时芳" English translation, "时方" English translation