English translation for "损耗因子"

dissipation factor
loss factor

Related Translations:

产品损耗:  product loss

损耗测定:  loss determination

静态损耗:  quiescent dissipation

回送损耗:  loos returnreturn loss

啤酒损耗:  beer losses

转移损耗:  transfer loss

重放损耗:  playback loss

损耗时间:  loss timelost time

扩散损耗:  dispersion loss

调节损耗:  regulation loss

Example Sentences:

	1.	Dielectric dissipation factor 介电损耗因子
	2.	In this dissertation the output windows ’ refection and absorption are analyzed in detail . 1 . with the development of gyrotron , the output power of the gyrotron is higher and higher , but the destruction of output window is more and more outstanding 由于窗片介质损耗因子的存在,当微波通过输出窗时会在窗片中产生高频介质损耗,微波的功率越高,产生的热量就越多。
	3.	The calculation formula for structure damping exhausting factor of combined pipe is denoted . structure exhausting factor of combined pipe treated by the damping material of sa - 3 is obtained with the different temperature and damping layer thickness 推导出管道表面阻尼处理后复合管结构损耗因子的计算公式，并得出了sa - 3阻尼材料处理后，不同温度、不同阻尼层厚度时复合管的结构损耗因子。
	4.	We firstly summarize the development of yb - doped fiber lasers , pumping methods and the applications of high - power fiber lasers . 2 . considering the scattering loss , we deduce the relationships between laser performances of yb - doped double - clad fiber laser and parameters of laser cavity from the steady state rate equations , numerically analysis the changes of laser performances , such as laser power with the parameters of laser cavity , including output mirror reflectivity , optimum length of double clad fiber 研究主要内容包括如下几个方面:一、首先对掺镱光纤及掺镱光纤激光器的发展状况、包层泵浦技术和高功率光纤激光器的应用等进行了综述;二、在前人对高功率双包层光纤激光器的理论基础上,在考虑了光纤散射损耗因子的情况对光纤激光器理论进行了推导,给出了准解析解,进一步完善了理论分析。
	5.	Through studying the working mechanism of the composing , the paper referred the bearing ' s analyzing model and designing flow . through shearing test of high damping rubber , the paper analyzes the influence of shearing shape , shearing strain range and inspiriting frequence on the characteristic parameters ( dynamic shear elastic module , dissipation engineering module , wasted gene ) . according to the rule of equivalent energy , the paper gets the hysteretic curve of hdr ' s equivalent bilinear model and parameters ' calculating formula 本论文通过对这种分离式减震支座各组成部分工作机理的研究，提出了该分离式减震支座整体的计算分析方法和设计流程；通过高阻尼橡胶剪切试验，分析了高阻尼橡胶剪切面形状、剪应变幅值、激励频率和试件高度对特征参数(动态剪切弹性模量、耗能模量、损耗因子)的影响。
	6.	The results show that the dynamic elastic modulus , loss modulus and complex viscosity of the nanocomposite are higher than those of pp , while the loss factor is lower , that the complex viscosity of the nanocomposites is more sensitive to temperature , and that the flow activation energy and the crystallization temperature increase respectively by 15 % and 10k as compared with pp , which may contribute to the enhanced interfacial interaction between pp and ommt resulting from the addition of tmpp 结果表明：与纯聚丙烯相比，纳米复合材料具有较高的动态弹性模量、损耗模量和复合粘度，力学损耗因子则降低，纳米复合材料的复合粘度对温度的敏感性略高于聚丙烯；界面改性剂的加入增强了有机蒙脱土与聚丙烯的界面作用，与聚丙烯相比，纳米复合材料的流动活化能提高约15 % ，结晶峰温度提高10k左右。
	7.	Due to the needs for the flat spectrum character , the leading sequence requires high self - correlation . the author selected a series of sequences whose highest peek to second highest peek ratio is big , from a series of " m " sequences . then , the optimized leading sequences were judged according to glf , the sequences which have lower glf would be more proper for the estimation 首先，作者提出搜索的标准，根据前导序列要有平坦的谱特性，从而要有好的自相关性，从一种m序列中找出最大峰与次大峰比例较大的一些序列，然后根据增益损耗因子来判决最佳前导序列，增益损耗因子越小的序列越适于估计。
	8.	Using the dynamic mechanical analyzer ( dma ) , pdms / pma ipn was investigated at temperature of 5 - 180 c . the initiator , the component ratio , the type of pdms and the filler effected the damping properties . the result showed that the damping ability varied with the parameter and there was an optimal value . the excellent damping material in the papers was ipn , where tan man was 0 . 735 , and the damping functional temperature ranged with tan 8 > 0 . 3 was 46 c . the micro - morphology and structure of pdms / pma ipn were characterized by two kinds of sem 高分子阻尼材料的有效阻尼功能区是在ipn材料的t _ g区间内，而研究常温条件下的阻尼性能更具有重要应用价值，运用动态热机械分析( dma )仪对ipn阻尼材料进行表征，在5 180内对其损耗因子( tan )进行研究，发现引发剂和交联剂的用量、聚硅氧烷的用量和分子量等参数对ipn阻尼性能的影响较大，存在一个合理配比值，当pma与粘度为3300pa ? s的pdms之比(质量比)为1 . 17 ： 1 、交联剂用量为1时， tan最大值为0 . 735 ，大于0 . 3的温域差达到46 。

Similar Words：

"损耗行程" English translation, "损耗性衰减" English translation, "损耗性资产, 递耗性资产" English translation, "损耗因数" English translation, "损耗因素测量器" English translation, "损耗因子(系数)" English translation, "损耗元件" English translation, "损耗指数" English translation, "损耗转矩" English translation, "损耗总量" English translation