| 1. | Study on preform of c c composites for aircraft brakes
复合材料坯体结构的研究 |
| 2. | Sintering behaviors of sub - micron - al2o3 green compacts at constant heating rates
3坯体的恒速升温烧结行为 |
| 3. | Inletting body temperature
坯体的入窑温度 |
| 4. | Patterns is incised on the surfaces of the body which is dry or semi - dry with cuts which are made of bamboo , or bone , or iron
刻花用竹骨或铁制的刀具在已干的坯体上刻画出花纹。 |
| 5. | Due to the softness of porcelain biscuit of jingdezhen , the body for throwing is usually thicker than that of other clay
由于景德镇瓷泥的柔软性，且需内外修坯，拉制的坯体均比其他黏土要厚。 |
| 6. | The shaped briquet was sintered at 1600 for 2 . 5 hours under normal pressure and at certain heating rate in si - mo electric furnace
成型后的坯体置于硅钼棒电炉中，在常压、适当升温速率下于1600保温2 . 5小时烧结。 |
| 7. | The results of linear sem - eds indicated that the content of iron in the red pottery coating was remarkably higher than that in the inner adobe of pottery
电子探针线扫描分析的结果表明，红色陶衣中铁的含量明显高于内部坯体。 |
| 8. | A model was established to estimate the volume fraction of the reaction products against the change of the initial pore volume fraction of the perform
文中初步建立了一个模型，以预测不同的坯体初始空隙率时材料产物中各相的含量。 |
| 9. | Use caution , porcelain body or the coating of brick bottom , which has high content of low - melting oxide and fuel which has more impurity , that all can corrode the roller
富含碱性氧化物成分的瓷砖坯体或砖低涂料，以及杂质含量高的燃料,都可能侵蚀辊棒，须谨慎使用。 |
| 10. | There was an optimum value for the the moo3 of the perform . when the initial sic particles with small size were added into the performs , the properties of the infiltrated were improved
实验表明，材料的性能并非随坯体中moo _ 3含量的增加而增加，坯体中moo _ 3含量存有一最佳值。 |
