| 1. | typical cure temperatures range from 125 to 175℃.
典型的固化温度范围从125175。 |
| 2. | Shrinkage stress was found to increase linearly with cure temperature .
我们发现收缩应力随固化温度直线增加。 |
| 3. | The final operation in propellant manufacture is the curing of the binder .
制造推进剂的最后操作是粘合剂的固化。 |
| 4. | Birefringence of the cured resin was measured with a senarmont compensator .
用塞拿蒙补偿器测定固化树脂的双折射率。 |
| 5. | Again, if there is excessive relative sliding the fluid will become too hot to solidify .
液体温度太高以致也不能固化。 |
| 6. | The force between a pair of helium atoms is so weak that helium does not solidify at all .
一对氦原子之间的作用力微弱得使氦根本不能固化。 |
| 7. | The rate of curing and consequently the rate of heat generation increase with the temperature .
固化速度，因而还有放热速度，都随温度而增加。 |
| 8. | In this department, hydroset plates are assembled and joined together at the plate lugs .
在这个工段，组装脱水固化的极板并通过极板耳连在一起。 |
| 9. | These stresses arise from the exothermic nature of the reaction during gelatin and cure .
这种残余应力系由凝胶和固化期间化学反应能放出的热引起的。 |
| 10. | Koch perceived that it would be far better if one could solidify a well-tried liquid medium with some clear substance .
郭霍设想，如果能用某种透明物质将经过多次试验的培养液固化可能更好。 |
