| 1. | The profile inspection of sc is studied detailedly
详细研究了空间凸轮廓面检测技术。 |
| 2. | Optimization of cam contour by b - spline curve
样条曲线优化设计凸轮廓线 |
| 3. | Study on the method for the nc machining conical cam profile
圆锥凸轮廓面的数控加工方法研究 |
| 4. | Basic principles of non - equivalent machining of spatial cam surfaces
空间凸轮廓面非等价加工的基本原理 |
| 5. | Profile design of cam with cylindrical roller - followers by offset surfaces method
圆柱滚子从动件凸轮廓面的等距曲面设计方法 |
| 6. | Layout of cam profile
凸轮廓线绘制 |
| 7. | The design of valve cam is mainly to design cam profile curve and is carried out in " dynamics correction method " in this paper
配气凸轮的设计主要就是设计凸轮廓形，本文选用“动力学修正法”进行设计。 |
| 8. | This method uses the law of conservation of energy , adopts the method of sectioning and the cam profile is designed according to the outputted speed curve
该方法应用能量守恒定律，采用分段的方法，按输出的速度曲线设计凸轮廓线。 |
| 9. | The mathematical model of the profile of cam was proposed on the basis of the method of reverse design with periodic boundaries and cubic uniform b - spline
摘要基于反求设计的方法，以3次均匀b样条曲线和周期边界条件，建立了凸轮廓线的数学模型。 |
| 10. | Cam mechanism with variable inputting speed , its driving force will change along with the profile of cam , thus make the design of cam mechanism becomes a difficult problem
摘要变速输入的凸轮机构，驱动力随凸轮廓线而变化，使得凸轮机构的设计成为一个难题。 |
