| 1. | 50ma or 100ma max circuits
每一回路50ma 100ma可更改 |
| 2. | Fault of primary coolant circuit equipment in nuclear power plant and the comprehensive intelligent diagnosis system
船用核动力一回路设备故障综合智能诊断系统 |
| 3. | The pressuriser is mainly used to maintain the pressure in the primary coolant circuit and prevent overpressure
稳压器的主要作用是维持一回路冷却水的压力，防止超压。 |
| 4. | The pressuriser is mainly used to maintain the pressure in the primary coolant circuit and prevent overpressure
一回路稳压器的主要作用是维持一回路冷却水的压力，防止超压。 |
| 5. | I . e . fuel cladding , primary circuit and containment to prevent the release of these fission products to the environment
即燃料包壳一回路及安全壳，以防止裂变产物外泄，影响环境。 |
| 6. | I . e . fuel cladding , primary circuit and containment ) to prevent the release of these fission products to the environment
(即燃料包壳、一回路及安全壳) ，以防止裂变产物外泄，影响环境。 |
| 7. | It is a cylindrical pressure vessel of about 2 m in diameter and about 13 m long , tapping off from one of the hot legs in the primary loops
稳压器直径约2米，长约13米，并与一回路内其中一环路的热管段接驳。 |
| 8. | It is a cylindrical pressure vessel of about 2 m in diameter and about 13 m long , tapping off from one of the hot legs in the primary loops
稳压器直径约2米，长约13米，并与一回路内其中一环路的热管段接驳。 |
| 9. | Water in the primary circuit is maintained at a high temperature of over 300 degree c under high pressure of above 150 bars to prevent it from boiling
在运作期间，一回路的水温会高达摄氏300度以上，并保持150巴以上的高压，以防沸腾。 |
| 10. | The primary coolant system of a 900 mw class reactor consists of the reactor pressure vessel and the primary circuit with 3 identical loop top figure
一个900兆瓦的反应堆主冷却剂系统上图是由压力壳及三个相同的环路相连组成即一回路。 |
